Guide to identifying which feedneck is used on your marker

[crankwalk]

http://www.intimidatorowners.com/files/images/IOG-feedneck_guide.jpg

If you are still not sure of your feedneck, please post a picture of your marker in this thread and we will help you figure it out.

Note: AIM Timmy bodies can use two types of feednecks. Cocker threaded if you keep the feed tube in the body.. or if you remove the feed tube you can install an Impulse threaded feedneck.

Yes, the stock feedneck on classics was ridiculously tall...
:cheers:

*EDIT*

http://i24.photobucket.com/albums/c35/royalkingsmitus/Mobile%20Uploads/0114000106.jpg

Left side is 2k2/Alias, and on the right is Cocker.

[jay814u]

Great post crank!!!!!!!:tup:

[Ollieleet]

Yeah, It's great thanks.

[Squirlly]

Yeah I didn't see if this was sticky (if not HINT HINT) but this post would have saved me $15 a year ago :D

NOTE: My 2k4 Alias uses cocker thread feedneck so if your buying an "Alias" feedneck for your very early Alias you might be buying wrong

-Tim

[crankwalk]

ok ok.. its been stickied ;) enjoy guys!

and yes Squirlly, Aliases used both types of feednecks.. the early ones were Cocker threaded, the later ones were "Alias" threaded - not only that, they used slightly different eye covers.. notice the dip where the eye cover screw is on the lower black/red fade Alias body? The eye cover for that Alias is contoured to fit into that dip.. it won't fit the upper silver Alias body because there's no dip.. the contour becomes an obstruction to installation.

[drthv8r]

how bout on a system x nme?
having trouble with pictures right now but i can't seem to find an answer

[Stewey956]

System X NME is a Intimidator knock off, so that being said and since there are no feednecks made specifically for NMEs, the 2K2/Alias style is what fits one.

[Philyoh]

how does the after market press fit looks like? if you have the pic

[Omega Ra]

http://i224.photobucket.com/albums/dd257/Omegara/Paintball/IMG_0041.jpg
http://i224.photobucket.com/albums/dd257/Omegara/Paintball/IMG_0068.jpg

my 2k5, which type would this be? cocker threaded?

[crankwalk]

Yes Omega that's Cocker threaded :tup:

[Omega Ra]

thanks crank! that feedneck is too discolored and tall for me lol.

[drthv8r]

just for the record in case there are any other system x nme users on the forums, the nme has impulse threading. weird, nothing else is impulse almost everything else is straight alias or very similar in most respects
-----------edit-----------
found out that some of the older nme's have cocker threaded also. don't know when the switch happened but mine is number 2047 so if ur number is close to mine then it is prolly imp threaded

[RageTimmyOwner]

So does the rage timmy use cocker threaded feednecks?
so does that mean i can just pick up any feedneck and assume it's cocker

[crankwalk]

No, Rage Timmies are based on the later Alias platform.. so they are Alias threaded (not Cocker) - if you post a close up pic of the feedneck area on yours I can confirm.

[Slimpikins976]

ok I want a clamping feedneck for my 2k2 Species that is a screw off, but I think it is an Alias style correct? how do I go about looking for one? eheheh thanks for the info in advance guys ....

[rjfrider]

Crank: My Timmy is a GZ - thick at the bottom, so is it a Cocker Style? thanks, rider

[Stewey956]

Thick at the bottom like in the pic, yes.

[oldironmudder]

What style are the threads on a classic?

[crankwalk]

ok I want a clamping feedneck for my 2k2 Species that is a screw off, but I think it is an Alias style correct? how do I go about looking for one? eheheh thanks for the info in advance guys ....2k2 species should be a Cocker threaded neck

Crank: My Timmy is a GZ - thick at the bottom, so is it a Cocker Style? thanks, riderYes it should be

What style are the threads on a classic?This is something I'm not sure of.. Lopez?

[gamer565]

think there angel thread...not %100 tho

[DFSniper]

actually, if i'm not mistaken, theyre held in place by a screw on each side, like the lightning and superbolt cockers.

[rjfrider]

Stewey: Yep thick at the bottom like in the pics at the start of the thread. So, when I bought 2 feednecks for a 2k2, they didn't fit because they're for Alias, instead. rider :confused:


should have checked the post, first

[Timmycuddler]

i love those high rise feednecks

[GOD]

I think this picture would be a worthwhile addition to the first post:
http://i24.photobucket.com/albums/c35/royalkingsmitus/Mobile%20Uploads/0114000106.jpg?t=1263456514
Left side is 2k2/Alias on the right is Cocker.
*This is assuming gen4 is 2k2/Alias.*

actually, if i'm not mistaken, theyre held in place by a screw on each side, like the lightning and superbolt cockers.
Mine was Angel threaded and had a screw on one side, the PsychoB cockers have one screw that holds the feedneck shaft (which is cocker threaded) in place.

[Kirkness]

does anyone have advice on jb welding a feedneck.

[egomaniac]

does anyone what type of feedneck is this

http://i93.photobucket.com/albums/l50/egomaniac311/DSC02536.jpg


http://i93.photobucket.com/albums/l50/egomaniac311/DSC02537.jpg


http://i93.photobucket.com/albums/l50/egomaniac311/DSC02540.jpg

[gamer565]

My linking to your thread was for you to read the first post and get the answer yourself, but since you didn't or can't figure it out yourself.

Its cocker thread.