crankwalk
09-06-2007, 10:54 PM
Okay, this is a list of every part that goes into 2k2 and Alias style intimidators. May be useful for those who are custom building a marker piece by piece. Please let me know if I've forgotten something.
2k2:
body
feedneck
eye covers
detents
clamshell trigger frame
trigger guard
trigger
membrane pad (2k2 style)
14 pt harness (this contains the microswitch, the on/off switch, the battery and noid connections, and the LED)
12 pt harness (this contains connections for the eyes, and sometimes LCD screen)
LCD screen
eyes
solenoid (usually with 2k2 markers, it was a green/black wire noid)
board
front block
HPR
LPR
gauge
bolt (with bolt pin)
poppet (with poppet spring, and cupseal)
ram sleeve
ram
ram cap
grips
barbs (6 total, 3 on noid, 2 on ram sleeve, 1 on front block)
low pressure hose
various screws
various o-rings
Alias style:
body
feedneck
eye covers
detents
trigger frame
trigger guard
trigger
membrane pad (Alias style)
main harness (this contains the battery and noid connections)
eye harness (this is the Y splitter for the 2pc eyes to connect to the board)
eyes
solenoid (usually with Alias style markers, its a red/black wire noid)
board
front block
HPR
LPR
gauge
bolt (with bolt pin)
poppet & spring (cupseal is threaded onto, and usually comes with, the poppet)
ram sleeve
ram
ram cap
grips
barbs (6 total, 3 on noid, 2 on ram sleeve, 1 on front block)
low pressure hose
various screws
various o-rings
2k2:
body
feedneck
eye covers
detents
clamshell trigger frame
trigger guard
trigger
membrane pad (2k2 style)
14 pt harness (this contains the microswitch, the on/off switch, the battery and noid connections, and the LED)
12 pt harness (this contains connections for the eyes, and sometimes LCD screen)
LCD screen
eyes
solenoid (usually with 2k2 markers, it was a green/black wire noid)
board
front block
HPR
LPR
gauge
bolt (with bolt pin)
poppet (with poppet spring, and cupseal)
ram sleeve
ram
ram cap
grips
barbs (6 total, 3 on noid, 2 on ram sleeve, 1 on front block)
low pressure hose
various screws
various o-rings
Alias style:
body
feedneck
eye covers
detents
trigger frame
trigger guard
trigger
membrane pad (Alias style)
main harness (this contains the battery and noid connections)
eye harness (this is the Y splitter for the 2pc eyes to connect to the board)
eyes
solenoid (usually with Alias style markers, its a red/black wire noid)
board
front block
HPR
LPR
gauge
bolt (with bolt pin)
poppet & spring (cupseal is threaded onto, and usually comes with, the poppet)
ram sleeve
ram
ram cap
grips
barbs (6 total, 3 on noid, 2 on ram sleeve, 1 on front block)
low pressure hose
various screws
various o-rings