PDA

View Full Version : cp trigger:help me please!

timmy_lover
10-13-2007, 05:08 PM
I just purchased a custom products trigger for my alias and put it onto my gun.I have noticed that it has some side to side play, and if I tighten the trigger screw (trying to solve the side to side play) then it squeezes on the bearings and doesn't let the trigger move. I was wondering if I just need to get a different trigger screw or something.
big_daddy_d
10-13-2007, 05:12 PM
may have to shim it...
timmy_lover
10-13-2007, 05:29 PM
what would i have to do to shim it?
big_daddy_d
10-13-2007, 05:41 PM
washer between the trigger and pin...
timmy_lover
10-13-2007, 06:23 PM
ill give it a try
GOD
10-14-2007, 02:40 AM
it's probably the head of the screw clamping down on the outside of the bearing, the part that is attached to the trigger, put a small washer on the screw that is just big enough around to touch the inner circle of the bearing and wide enough to seperate the head of the screw from the outside of the bearing.
timmy_lover
10-14-2007, 03:50 PM
sounds like a plan.thanks