LunchboxMischke
04-12-2009, 02:06 PM
so i got bored at work the other day so i decided to cut my bolt pin down so it made my marker seem like it had no bolt pin and here it is
step one: take off bolt pin cap shocktech pins screw on so little heat and your fingers should do the trick
step two: cut your bolt pin to correct size (changes on body style of your gun )
step three : sand the edges away with a file or what ever will leave a smooth rounded surface
step four : stick it in your bolt and then your marker
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1055
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1058
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1056
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1057
only down side i see to this is you ave to use small pliers to get the bolt out u just grasp the bolt pin itself but if your gun is tuned in correctly you should need to take out your bolt on the field
step one: take off bolt pin cap shocktech pins screw on so little heat and your fingers should do the trick
step two: cut your bolt pin to correct size (changes on body style of your gun )
step three : sand the edges away with a file or what ever will leave a smooth rounded surface
step four : stick it in your bolt and then your marker
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1055
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1058
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1056
http://www.intimidatorowners.com/forums/picture.php?albumid=38&pictureid=1057
only down side i see to this is you ave to use small pliers to get the bolt out u just grasp the bolt pin itself but if your gun is tuned in correctly you should need to take out your bolt on the field