Fsdo

[Redbeard75]

What are the most common things in a mark7 (closer) that would cause FSDO?

[Ollieleet]

Bolt stick, Boost your ABS.

[bronze]

i had the same issue. Prevouis owner used dow55 on the bolt o rings and turn the Anti Bolt Stick Off. MAJOR fsdo.

I replaced the o rings, cleaned the bolt, and relubed with triflow oil. Then bump the abs up a setting. i have a tadao board. not sure if frenzy has abs though

[Redbeard75]

I will give it a go tomorrow. It shoots great after the first one or two shors.

PE engine is new, No dow55 on the bolt, and a small drop of triflow on the bolt o-rings. Also has a Tadao board, and not overlubed any place else.

[bronze]

well u gotta run at stock settings for awhile, until that PE kit gets broken in. 80 LPR 190 hpr. 8ms of dwell. with a setting 3 on ABS(ups it 2 ms on the dwell for first shot) Thats what i run and seems to work just fine now

[Stewey956]

Stock engine settings are 80PSI for the LPR and 230 for the HPR.

[Tabris17]

Run the lpr higher until it breaks in, adjust for velocity through the hpr.