2k5 timmy help plz!

[riceboy927]

Ok so I love this gun, but the problem I'm having is like after first airing it up I take a shot and nothing comes out, but then I pull the trigger again and then I shoot 2 balls, after my gun shoots fine! So whats going on? I'm pretty sure my bolt isn't to far back or something cuz I can feel the very lip of it when I put my finger in the breech but plz if anyone can help, it isn't so bad but its annoying!

[bronze]

do u have an adjustable ram cap? i suggest double checking your dwell and making sure the lpr pressure is good.

[riceboy927]

I do have an adjustible ram cap, and my dwell is standard and my lpr is running between 70-80 psi

[Ollieleet]

what board are you running?

[riceboy927]

stock

[Ollieleet]

replace & lube your ram o-rings perhaps.

[riceboy927]

I'll give it a shot

[DFSniper]

lube the noid?

[necrolyte]

It's first shot drop off. Could be a tiny leak in your solenoid, or your ram/bolt sticking, etc.

Lube the ram orings, lube the bolt orings, and if you want to get into it, lube the solenoid up. Most aftermarket boards have a 'FSDO' setting which basically ups the dwell for the first shot around 4-5ms to compensate.

Make sure your dwell is on 8-9ms, and if need be, bump it to 10-11 ms and try it out.

[obladeo]

rice boy where are you? US? uk? I fix markers in the uk for free. (you just pay for the parts)