Have u had this dwell issue?????

[Evil Rocky]

Well had a used the VICE this weekend with some slight problems. I used it 2 weeks ago and I had my VICE at 60 lpr and 6 dwell and was shooting good with no problems. Well many times I have used my VICE at 50-55lpr and never have not had any problems with dwell at 7-8... So this past weekend I placed my gun at 57-60 lpr and Dwell at 7 and I could not get my gun under 320. The lowest it got was 313 :mad: I shot 3 hoppers through it (Chrono station) and no chops though :D

Well so I started to mess with the VICE a little since I did not use all my paint like I normally do and I left my LPR at 60 (With the lpr tester) and as I was lowering my Dwell Lowest I was able to go and shoot still was 4, but had drop off I could not get it to go down on my velocity??? after trying to reset my regs like 3X I placed the LPR at 57-58 (a tad margin under 60 with LPR tester) and placed dwell at 8 I was back up perfectly at 289-290fps :eek: It just seems like my Dwell is crazy LOL

Has anyone ever had this happend before? Either way the Vice was shooting good and have no complaints.

[poloboy821]

i think your problem is you are trying to run too low of a dwell... you do not get any advantage to running a dwell under 8ms. And as far as lpr pressure, i suggest keeping it 60 PSI or above, or you will start to get FSDO and drop off at high rates of fire.

[lopez17]

Stock dwell is 6ms poloboy. The stock LPR pressure is 80psi as well. I'd recommend going back to your stock settings, get your baseline and adjust from there.

[Evil Rocky]

^^ Sorry for the late replys guys.

I actually have the LP valve, so 60-65 is normall.

When I put my dwell at 6ms I cant get my velocity nothing below 312. The begining I mentiond that and thats why I thought it was real weird.

Thanks