KeenDean
11-27-2007, 08:31 AM
Ok, guys here's a scoop for you, although I guess some of you may already have heard. Will Roberson at Tadao Technologies is developing a new board for the Alias framed timmy's out there. It will be the new Yakuza OLED boards that are currently in development for the Ego, Marq and Dm range of markers.
http://www.tadaotechnologies.com/news/templates/template.aspx?articleid=40&zoneid=2
http://www.tadaotechnologies.com/news/templates/template.aspx?articleid=45&zoneid=2
Basically after reading the above links to articles on the Tadao website about the development of the Yakuza board, I emailed Will and asked if he considered making a board for the Alias.
Below are all the transcripts between me and Will...
Hi Will,
Sorry for seeming like I'm inpatient, but I posted this question in your FAQ ask a question section on your website. And as yet have not seen a reply, or acknowledgement that my question has been received.
My request is this. With the development of your new Yakuza OLED boards for the Marq, Ego and DM markers, would it be possible to develop/release a Yakuza OLED board for the Alias Intimidator? The Alias frames already support LCD boards, as they were supplied with stock frenzy LCD boards. I know that the Intimidator is somewhat of a dinosaur compared to the new GATS on the market at the moment. However, the Intimidator does have a large and well established fan base in the USA, judging by the forum content in PbNation and Intimidator Owners.
Just a thought…
Regards,
Dean Mazur.
Dean,
Just as an FYI, I do not check the FAQ questions online on any regular basis. I receive hundreds of emails a day as it is, so if you want to ask questions or need technical support, please email me directly at will@tadaotechnologies.com.
You're in luck, as I am working on an Alias Intimidator board as part of the Yakuza series. It will have the OLED screen, but the release date will be sometime this spring, as I have to finish off the Yakuza boards for guns still in production, first.
Thanks for the support, and for showing interest in our new technology!
Regards,
Will Roberson
Tadao Technologies LLC
So for all those die-hards that have resisted the temptation to sell there beloved timmy's to fund there purchase of the new protege or vice, there's good news that some manufacturers are still producing aftermarket products for the aging workhorse.
I personally will be keeping a keen eye on developments of this board, as I have always liked the interaction of using a LCD screen. I only went over to the M6 LED board because it has greater adjustment capabilities as well as millennium ramping (the only legal ramping allowed in Europe).
http://www.tadaotechnologies.com/news/templates/template.aspx?articleid=40&zoneid=2
http://www.tadaotechnologies.com/news/templates/template.aspx?articleid=45&zoneid=2
Basically after reading the above links to articles on the Tadao website about the development of the Yakuza board, I emailed Will and asked if he considered making a board for the Alias.
Below are all the transcripts between me and Will...
Hi Will,
Sorry for seeming like I'm inpatient, but I posted this question in your FAQ ask a question section on your website. And as yet have not seen a reply, or acknowledgement that my question has been received.
My request is this. With the development of your new Yakuza OLED boards for the Marq, Ego and DM markers, would it be possible to develop/release a Yakuza OLED board for the Alias Intimidator? The Alias frames already support LCD boards, as they were supplied with stock frenzy LCD boards. I know that the Intimidator is somewhat of a dinosaur compared to the new GATS on the market at the moment. However, the Intimidator does have a large and well established fan base in the USA, judging by the forum content in PbNation and Intimidator Owners.
Just a thought…
Regards,
Dean Mazur.
Dean,
Just as an FYI, I do not check the FAQ questions online on any regular basis. I receive hundreds of emails a day as it is, so if you want to ask questions or need technical support, please email me directly at will@tadaotechnologies.com.
You're in luck, as I am working on an Alias Intimidator board as part of the Yakuza series. It will have the OLED screen, but the release date will be sometime this spring, as I have to finish off the Yakuza boards for guns still in production, first.
Thanks for the support, and for showing interest in our new technology!
Regards,
Will Roberson
Tadao Technologies LLC
So for all those die-hards that have resisted the temptation to sell there beloved timmy's to fund there purchase of the new protege or vice, there's good news that some manufacturers are still producing aftermarket products for the aging workhorse.
I personally will be keeping a keen eye on developments of this board, as I have always liked the interaction of using a LCD screen. I only went over to the M6 LED board because it has greater adjustment capabilities as well as millennium ramping (the only legal ramping allowed in Europe).