PDA

View Full Version : marq6, no striggerspring = fullauto


grossmeisterbe
02-11-2010, 10:01 AM
i have my new baby (marq6 with tadao ryjin board)

unfortunatelly i am to weak :facepalm: to walk the marq. so i left the trigger return spring away. now i can walk but the marq goes directly into fullauto because of triggerbounce. i tried AMB=5 and debounce =50 on the tadaoboard, but it didnt help.

any other ideas instead of reinstalling the spring?

Ollieleet
02-11-2010, 10:11 AM
Magnets, rare earth magnets from radio shack should do the trick, I don't understand how you're too weak to walk with the spring in..? Also if you don't want magnets you can try a pen spring with decent debounce (you should already know 50 is WAY WAY too high.

grossmeisterbe
02-11-2010, 10:58 AM
@ollieleet: i like my triggerreturn really smooth. in my other guns the return done by the microswitch is enough. that works perfect for me.
i tried pen springs, but they are as hard as the original marq spring.

i know 50 is way to high :-(

i will try some magnets. but not shure were to get some in germany (we dont have radio shacks here)

Ollieleet
02-11-2010, 11:23 AM
Criticalpaintball sells them, or you can buy them off ebay.

oldironmudder
02-11-2010, 12:39 PM
Its it going 'full auto' during play or just messing around with the yes off & no hopper/barrel?

My Alias goes nuts until I put a hopper & barrel on it.

grossmeisterbe
02-11-2010, 03:20 PM
i tried without hopper...
just barrelswapinside the barrel.

oldironmudder
02-11-2010, 06:52 PM
Put the hopper on it & fill it full of paint. Between that & shouldering it the run away effect should go away & leave you with a gun thats to easy to shoot paint with.

toolittletoolate
02-11-2010, 07:14 PM
i tried without hopper...
just barrelswapinside the barrel.

I was getting INSANE bounce with my Shocktech, quick walk, over 30bps. That was with eyes off, dry fire. Shot it with paint and eyes on, no bounce.
Try your gun with paint and see what happens, and make sure your in semi mode ;)

SpyderMan723
02-11-2010, 09:08 PM
set your activation points on your trigger too.

grossmeisterbe
03-05-2010, 11:11 AM
i tried everything....

finally i solved the problem with 2 magnets.
now the gun runs really fast and has no fullauto bounce.
everything is fine!