INTIMIDATOR EYES & WIRING/barbs/o-rings/screws/lube/macro/fittings/gauges

[crankwalk]

Up for sale are various Timmy parts and other general maintenance items. Great for custom or Spimmy builders!

**Shipping is a flat rate fee for all items - PLEASE ADD $2.00 TO ALL ORDERS FOR SHIPPING.**

I do not accept trades. I accept PayPal, MO & cash.

BL Markers Wiring

* Alias/D2 battery harness ($10.00)

http://www.crankypaintball.com/sale/cranksale10.jpg

* Alias eye harness ($10.00)

http://www.crankypaintball.com/sale/cranksale11.jpg

* Intimidator eyes ($10.00 per eye - $17.00 per set)
All eyes allow for 20° of misalignment and are more powerful than stock eyes. O-rings included.

http://www.crankypaintball.com/sale/cranksale13.jpg

* 06/Gen4/Defiant 2 eyes ($20.00)
All 06 eyes allow for 20° of misalignment and are more powerful than stock eyes. O-rings included.

http://www.crankypaintball.com/sale/cranksale14.jpg

* 05 Wiring Combo ($32.00) - Save $5.00!!
Pick up a battery harness, eye harness, and a pair of eyes and save $5.00 over buying them separately.

http://www.crankypaintball.com/sale/cranksale10.jpg http://www.crankypaintball.com/sale/cranksale11.jpg http://www.crankypaintball.com/sale/cranksale13.jpg

Intimidator/D2 Barbs & Hose

* Nickel plated high flow barbs w/fiber washers ($2.75/ea)

http://www.crankypaintball.com/sale/cranksale08.jpg http://www.crankypaintball.com/sale/cranksale18.jpg

If you can fit an .050" allen key through the barb, it is high flow. However, for maximum flow, you want a barb which will fit a 1/16" allen key (as pictured)! These are the same inner diameter as Hybrid "Hyper Flow" barbs, for max flow.

HOSE SOLD IN COMPLETE 1FT INCREMENTS ONLY.

* Intimidator hi-flow hose ($1.00/ft)
High flow tubing for Intimidators. This is the same inner/outer diameter as Hybrid "Hyper Flow" hose that comes in their kits (this is larger than your stock Timmy hose).

* Autococker hose ($1.00/ft)
General purpose low pressure tubing for Autocockers and has slightly smaller ID/OD than the Intimidator hi-flow hose above. Can also be used to replace hose on Classic and 2k2 Timmys that have their original "standard flow" barbs installed.

O-Rings

* 2k2 o-ring kit - 1 complete marker rebuild, 1 ram bumper ($7.00)

http://www.crankypaintball.com/sale/cranksale05.jpg

This is the basic kit, but offers a complete replacement of all o-rings on your 2k2 Timmy.

Poppet•HPR Housing•LPR Housing•HPR Internals•LPR Internals•Reg Block•Ram•Ram Cap•Bolt•Ram Sleeve•Ram bumper

NOTE: Unlike some other kits for sale out there, these kits include genuine white teflon pin valve rings AND the correct OEM sized rings for the ram sleeve and reg housings. Contrary to what is listed in the 2k2 Bob Long manual, the proper ram sleeve o-rings are NOT correct and the sizes listed for the LPR/HPR housings are also wrong. The manual even fails to fully identify some necessary o-rings on the regs! Needless to say, the proper sizes are crucial to good air seals. While some other sellers carry bulk kits for many different markers and simply take the specs out of the manuals as correct, my kits are built from experience gained by building Timmys. Every o-ring in my kit will be a direct replacement, properly sized for your 2k2 parts listed above.

* Alias o-ring kit - 1 complete marker rebuild ($6.00)

http://www.crankypaintball.com/sale/cranksale06.jpg

Single rebuild for your Alias style marker.
NOTE: This does not include the "specialty" rings such as u-cup and square LPR ring, rather has fully compatible round o-rings as pictured.

* Gen4 (Empire 2 / Infamous / Ripper 3) o-ring kit - 1 complete marker rebuild ($6.00)
Single rebuild for your Gen4 marker.
NOTE: This does not include the "specialty" rings such as u-cups and square LPR ring, rather has fully compatible round o-rings (not yet pictured).

* O-ring pick ($2.50)
If you've ever had to remove the small poppet o-ring you will REALLY appreciate this item.

* Team Kit ($35.00)

http://www.crankypaintball.com/sale/cranksale19.jpg

The team kit includes enough o-rings for FIVE complete marker rebuilds (100+ o-rings!), five ram bumpers, 1oz of Dow 55 (or Dow 33 if you choose), 3/4 oz of Tri-Flow, and an o-ring pick. Comes packaged inside compartmented plastic box. Also, a diagram will be included so the correct o-rings can be found quickly and easily - no guesswork! Diagram will consist of actual o-ring locations (i.e. bolt o-rings, ram o-rings, etc) rather than vague sizes. Also available for Alias style markers.

Individual O-Rings & parts:

* individual teflon pin valve o-rings ($0.50/ea)
* individual ram sleeve & LPR o-rings ($0.50/ea)
* all other individual o-rings ($0.25/ea)
* Intimidator ram bumpers ($1.00/ea)
* Intimidator stiff (clear) detents - SOLD OUT
http://www.crankypaintball.com/sale/detents.jpg

Macroline & Fittings

http://www.crankypaintball.com/sale/cranksale09.jpg

* Macroline ($1.00/ft)
High strength macro - your choice of black or translucent white.

* 90 degree swivel fittings ($4.00/ea)
* 90 degree non-swivel fittings ($3.00/ea)
* straight fittings ($3.00/ea)

Stainless Steel Screws

Replacement stainless steel screws for both 2k2 & Alias style markers. Replace your old worn out screws with these polished high strength stainless steel screws.
NOTE: the only screws NOT INCLUDED in the 2k2 kits are the ram sleeve set screw and trigger pivot screw (sold separately). The Alias kits *DO* come with all set screws (LPR & ram sleeve) but again, no trigger pivot screw.

* "Basic" 2k2 SS LCD screw kit - 15 screws, 3 washers ($7.00)
Included are Rubber grip screws•Trigger frame (clamshell halves) screws•LCD Trigger frame mounting screws•LPR block mounting screw•Eye cover screws•Three washers

http://www.crankypaintball.com/sale/cranksale01.jpg

NOTE: Washers may not be necessary to use in every situation, but I like to include them in my 2k2 kits.

* "Extended" 2k2 Clamshell SS screw kit - 15 screws, 1 o-ring ($9.00)
Included are Circuit board retaining screw WITH insulator o-ring•LCD screen screws•On/Off switch screws•Solenoid screw•Side plate screws•Trigger microswitch screws

http://www.crankypaintball.com/sale/cranksale02.jpg

This extended clamshell kit will replace every screw inside your 2k2 LCD clammy. It contains those small, hard to find, and finely threaded "specialty" screws that somehow manage to get lost over time or when buying used parts. Kit also comes with rubber o-ring for the circuit board screw, which serves as an electrical insulator. A very necessary but often overlooked item.

* "Complete" 2k2 SS screw kit ($15.00)
All screws and accessories listed in both the "Basic" and "Extended" kits.

* "Boxed" 2k2 SS screw kit ($21.00)
All screws and accessories listed in both the "Basic" and "Extended" kits, complete set of 6 hex keys for Timmys (includes the large regulator screw key, kits fit both 2k2 & Alias), packed in a sturdy plastic storage box with adjustable compartments. Also available for Alias style markers @ $17.00 per kit.

http://www.crankypaintball.com/sale/cranksale03.jpg

* "Complete" Alias SS screw kit - 18 screws, 1 o-ring ($10.00)
Included Rubber Grip Screws•Trigger Frame Screws•Trigger Frame Mounting Screws•Upper & Lower Circuit Board Retaining Screws (Lower w/insulating o-ring)•Eye Cover Screws•LPR Block & Ram Sleeve Set Screws (black).

NOTE: Most sellers don't include the larger set screws in their Alias kits! This is a COMPLETE kit to replace every screw on your Alias (Except trigger pivot screw, sold separately).

CHECK THE FIRST SECTION OF THE NEXT POST DOWN FOR INDIVIDUALLY PRICED SCREWS & INCLUDING AN ALIAS BLACKOUT KIT!

[crankwalk]

Individual Screws:

2k2:

* Rubber grip screws - 4 per marker ALSO FITS 2K5 ($0.50/ea)
* Trigger frame screws - 6 per marker ($0.50/ea)
* Trigger frame mounting screws - 2 per marker ($0.50/ea)
* LPR block mounting screw - 1 per marker ($0.50/ea)
* Eye cover screws - 2 per marker ALSO FITS 2K5 ($0.50/ea)
* Washers for LPR block and trigger frame screws ($0.50/ea)

* Circuit board retaining screw ALSO FITS 2K5 lower - 1 per marker ($0.50/ea)
* LCD screen screws - 3 per marker ($0.50/ea)
* On/Off switch screws - 2 per marker ($0.50/ea)
* Solenoid screw - 1 per marker ($0.75/ea)
* Side plate screws - 6 per marker ($0.50/ea)
* Trigger microswitch screws - 2 per marker ($0.75/ea)
* O-ring for circuit board screw ($0.25/ea)

* 2k2 Ram sleeve set screw - 1 per marker ($2.00/ea) DOES NOT COME IN ANY KIT.

Alias:

* Trigger frame screws - 6 per marker ($0.50/ea)
* Trigger frame mounting screws - 2 per marker ($0.50/ea)
* Upper circuit board screw - 1 per marker ($0.75/ea)
* LPR block set screw - 1 per marker ($1.00/ea)
* Alias Ram sleeve set screw - 1 per marker ($2.00/ea)

* Universal trigger pivot screw - fits 2k2 and 2k5 ($4.00/ea) DOES NOT COME IN ANY KIT.

Blackout Screw Kits

* Alias style blackout kit - $10.00
Includes grip panel, grip frame halves, frame-to-body mounting & eye cover screws

http://www.crankypaintball.com/sale/cranksale29.jpg

Hex Key Kits

http://www.crankypaintball.com/sale/cranksale24.jpg

Set of 6 hex keys, for 2k2 & Alias ($3.25)

Lubes

http://www.crankypaintball.com/sale/cranksale07.jpg

Economical sized o-ring lube, a small container will last you through many rebuilds.

* Dow 33 - Shocker/Ion Lube ($5.00/ea)
* Dow 55 - Timmy Lube ($5.00/ea)
* Tri-Flow - Timmy Bolt Lube ($2.50/ea)

Miscellaneous

* 100% Kevlar Sleeves - SOLD OUT
For those that like to go gloveless! Sleeves are made of 100% Kevlar fabric, dual layered thickness, are cut resistant and are washable. These particular sleeves have individual pre-cut fingers in order to provide coverage of the knuckles as well - unlike "other" popular cotton sleeves which may leave the fronts of your knuckles exposed since they are completely open in the front. Color is natural Kevlar yellow.

http://www.crankypaintball.com/sale/cranksale28.gif

* Dual 9v Halo/Reloader B Mod ($3.00)
Convert your Halo/Reloader B from 6AA battery power to two smaller 9v batteries, reduce weight, and no longer worry about having to buy 9v for your marker and AA for your loader. All 9v mods are shrinkwrapped at the connections for best performance and durability.

http://www.crankypaintball.com/sale/cranksale23.jpg

[b]* Black face 0-160psi mini gauge - SOLD OUT

http://www.crankypaintball.com/sale/cranksale32.jpg

* Black face 0-300psi mini gauge - SOLD OUT

http://www.crankypaintball.com/sale/cranksale12.jpg

* Black face CROSSFIRE 0-5000psi mini (HPA Tank) gauge - SOLD OUT

http://www.crankypaintball.com/sale/cranksale34.jpg

* Blue Loc-Tite ($2.50)

http://www.crankypaintball.com/sale/cranksale21.jpg

* Teflon tape - 50ft roll ($3.00)

http://www.crankypaintball.com/sale/cranksale22.jpg

[lastmanstanding]

I'm interested in some triflow, dow 55, and alias oring kit. could you do 11.75 for everything shipped? that's all I have in my Paypal. pm me please

[crankwalk]

lastmanstanding: PM sent :tup:

[anarchyintheua]

I was wondering if you might have an extra cupseal for a 2k2 timmy. Also i was wonder how much with shipping would a complete screw kit, a foot of high flow tubes, and i already have three barbs and i was wondering how many more would I need to finish up the job.

[crankwalk]

anarchyintheua: very sorry I don't sell 2k2 cupseals. i MAY have a used one floating around, chances are slim though. Sent you a PM on the other stuff..

[Alias2007]

Need another Alias black outkit..bottle of triflow and 4 of the dentents. PM me with the total please. ;)

[crankwalk]

Alias2007: PM Sent!

[AirSin]

How accurate is the 0-300 psi gauge?

[crankwalk]

AirSin: Gauges are usually most accurate within the middle third of the scale. So unless you're going to be putting this gauge on a marker where you run between 100 and 200psi on the LPR, I'd suggest the 0-160psi gauge (where the range ~53psi-~106psi will be most accurate)

[coolj34]

I need a set of the timmy eyes ($17) a sideplate screw(.50) and a dual 9V mod harness as well($3).

Should be $22.50 shipped correct?
PM your paypal.
-THANKS!

[crankwalk]

coolj34: PM sent! thanks!

[coolj34]

Payment Sent!

[AirSin]

AirSin: Gauges are usually most accurate within the middle third of the scale. So unless you're going to be putting this gauge on a marker where you run between 100 and 200psi on the LPR, I'd suggest the 0-160psi gauge (where the range ~53psi-~106psi will be most accurate)

Cool.

I'll take an Alias o-ring kit for now.

So, $8.00 dollars total?

[jrmiller]

ill take a Black face 0-160psi mini gauge. pm me payment info

[crankwalk]

coolj34: received, thanks for the purchase :tup:

AirSin: that's correct, PM sent

jrmiller: no problem, PM sent as well

[Slimpikins976]

i need the 0-160 psi black face gauge and one alias screw kit please !! that should knock out all I need with my marker for now thanks so much crankwalk !!!

[crankwalk]

Slimpikins976: you got it, check PM

[xxAdr3n4l1n3junk13xx]

hey man. all i need is one screw. its for an alias style gun(2k5 timmy) its the upper board screw that goes through the board and microswitch to mount to the frame. how much for it.

[crankwalk]

Hello that's 75 cents plus shipping - sent you a PM

[coolj34]

Items received. Yet again, another flawless deal with the crank man.

PS: Those eyes are really good. Well reinforced to prefent breaks!:tup:

[crankwalk]

coolj34: thanks man! I'm glad they arrived on time for you. Enjoy!

[xxAdr3n4l1n3junk13xx]

hey. all i need now is a new barb. i have whatever ones come with the stock 2k5 timmy. i need one of them if possible. pm me


p.s- i got the screw and its exactly what i needed

[crankwalk]

xxAdr3n4l1n3junk13xx: glad to hear your order arrived safely - check PM

[Alias2007]

Pming you an order

[hype]

I need 2 of the picks & 1 alias rebuild oring kit how much shipped to Canada, zip code M9R-3T6.pm me pls.

[crankwalk]

hype: PM sent

[IRStookmySpyder]

free up.

[jrmiller]

i need

2k5 Upper circuit board screw
2k5 Trigger frame mounting screws(2)
Circuit board retaining screw
Dow 55

thanks crank :cool::tup:

[crankwalk]

PM'ed you!

[oldironmudder]

Crank, would you have the screws on hand to put together for a classic frame?

[crankwalk]

oldironmudder: hmm, i may have some that could be compatible.. PM me with what screws you're missing

[haolekid]

crankwalk-
i emailed you about getting some macroline and fittings.

mahalo.

[s4mm4n16]

lol are the kevlar sleeves semi bulletproof?

[crankwalk]

haha, I would imagine so :D

[heisman01]

sent u a pm and $ for 2k6 eyes

[crankwalk]

heisman01: got it, thanks!

[candyman]

PM'ed You.

[crankwalk]

candyman: PM'ed you back :)

[Gee Tee]

Hi Crankwalk

Can you give me a price for 3 of the 0-160psi gauges + shipping to the UK?

Thanks

GT

[crankwalk]

PM'ed ya Gee Tee

[heisman01]

pm me your pay pal addy i need 2k5 eyeys have $ in hand

[Gee Tee]

3 16o psi gauges arrived in post today

Thanks Crankwalk :cool:

[crankwalk]

PM's sent!

Glad to hear it Gee Tee :)

[pinkanese]

I'm interested in a 2k2 o-ring kit, a foot of black macro, a swivle 90* fitting,and a set of detents. Thanks.

[crankwalk]

pinkanese: PM sent

[lastmanstanding]

Crankwalk Congrats on the new marker, hope to see them around soon. I was wondering if you still have any laser eyes, I.E. red, green, blue. if you do please pm me I am interested in buying a set or maybe two.

[crankwalk]

thanks man! but sorry, no more Timmy laser eyes just what's in this thread

[Megatron]

1 alias oring kit, 1 90 degree swivel fitting, 1 alias ss screw kit, 1 bottle of tri-flow, 1pr kevlar sleeves, & 1 halo 9v mod.....$40 shipped??

[crankwalk]

Megatron: PM'ed!

[lp04]

need
main harness
eye harness
screw kit
membrane pad ( if u have it )
o-ring kit

all for alias

[crankwalk]

lp04 no prob check PM

[lopez17]

Hey bro, I need two sets of Eyes and 5 barbs...can you PM me the damages on that and I'll hit you with a paypal.

[crankwalk]

lopez17: no problem! check PM :D

[jasper73724]

pmed ya

[crankwalk]

jasper73724: sent you an E-mail

[Timmyfreek]

ok heres my list:

* 05 Wiring Combo ($32.00) - Save $5.00!!
Pick up a battery harness, eye harness, and a pair of eyes and save $5.00 over buying them separately.

* Nickel plated high flow barbs w/fiber washers ($2.75/ea) ill take 4

* Intimidator hi-flow hose ($1.00/ft) need 2 ft.

* Upper circuit board screw - 1 per marker ($0.75/ea) ill take 3

also idk if you have an alias poppet, but if you do ill definatly take that too.

please pm me a total with shipping and ill paypal you the money right away.

[crankwalk]

Timmyfreek: PM sent! thanks

[Gee Tee]

Hi Crankwalk,

can you PM me a price for a stainless screw set for my '05 Empire, and 2 sets of upgraded eyes. Not sure if they are a different spec but I want one set for my Empire & the other for a team mates '05 Alias.

Thanks

Gary

[crankwalk]

Gee Tee: PM'ed you!

[sano]

Need a foot and a half of the autococker hose and a foot and a half of the high flow hose. PM me with details. Thanks

[crankwalk]

PMs sent

[sparky81]

pm'd you need 3 barbs and 2ft. high flow hose.

[crankwalk]

sparky81: PM sent!

[timminator10]

hey crankwalk, im interested in rubber grip screws, dow 55, and a 160 psi gauge. PM me

[Big Steve]

Hey Crank, I need an Alias batter harness and 6 teflon pin valve o-rings

[crankwalk]

PM'ed all!

[lopez17]

Hey bro! I need 5 feet of the high flow hose. Can you hit me with your email address so I can paypal you the $$?

Thanks!

[crankwalk]

lopez17: PM sent!

[superbuddha14]

hey crank, might be placing a large order here haha. as you know, i'm making a 2k5'd ripper1 and i know it'll be a combo of 2k2 and 2k5 parts. is there an o-ring and screw kit specific for that or do i have to order every single one indivdually? haha

[crankwalk]

I could put something together for you custom, just let me know what items you need and we'll figure it out via PMs :)

[superbuddha14]

ok cool thanks for working with me haha. I basically need 2k5 orings and screws that'll work for a empire frame, alias lpr and block, and the ramsleeve. 2k2 orings and screws for a ripper1 body, and such like eye screws etc. Basically for a completely 2k5d ripper1 haha. Let me know if I'm too broad

[hype]

Hello I need 2 battery harnesses & 4 black screws for my grips how much ?? & I have PP we have dealt in the past..........

[jamrens@comcast.net]

i need an eye for a 2k2

[crankwalk]

PMs sent

[lopez17]

Got that hosing earlier this week. Thanks bro! I have some markers to put together if I can squeeze in the time.

[jamrens@comcast.net]

money sent

[crankwalk]

lopez17: glad to hear it! :tup:

jamrens@comcast.net: received and your item shipped yesterday, thanks

[rabbit]

need an 05 wiring combo, 6 high flow barbs, and 2ft of high flow hose. total please.

[crankwalk]

rabbit: pmed' you

[bizmarck]

hi im from greece and just got a rl timmy, need
05 wiring combo
nickel plated high flow barbs(2)
hi flow hose 4ft
team kit
intimidator stiff detends(8)
boxed 2k2 screw kit
dow 55(3)
black face 0-160psi mini gauge.
it is very hard to find timmy parts in greece.
pm me for price. thanxs.

[crankwalk]

bizmarck: I can ship most of that to Greece, check PM

[superbuddha14]

hey crankwalk I'd already like to place another order haha. I'll take an o-ring pick, bottle of triflow, dow55, trigger pivot screw(I'm guessing this is what holds the trigger in), a 0-160 guage, and anychance I can buy just the little box that holds orings/screws? Pm me please, thanks

[crankwalk]

PMs sent!

[Big Steve]

Crank, I need an alias eye harness, 5000 PSA HPA gauge and 2 alias frame screws (the long ones).

thanks

[crankwalk]

Big Steve: check your PMs

[Mystical-Dragon]

Maybe I missed it but how much for alias membranes?

[crankwalk]

Mystical-Dragon: well I don't sell membranes but I happen to have one NIB one.. check your PM

[bigkiduk]

hello there id like to place an order please im in the uk so if i could have a price on shipping that would be great

05 wiring combo $32.00
alias/d2 battery harness $10.00
hi flow hose x2 $2.00
autococker hose x2 $2.00
dual 9v/reloader harness x2 $6.00

total $52 plus shipping fees

many thanks

dan

[ahayzee]

hey crankwalk you should sell me a timmy :)

[crankwalk]

bigkiduk: PM sent!

ahayzee: I wish I could help you out bro, but I don't ahve any spare timmys! lol

Check our BST threads, there are a lot of guys here that could probably help you out.

[jamrens@comcast.net]

i want the team kit for a 2k2

[crankwalk]

^^^^^PM'ed you

[wackyguns]

im interested in a battery harness and eyes for an 05 alias how much ?

[Liam]

I need the complete 2k2 ss screw kit, and blue loctite. You seem to have access to alot of timmy parts, do you know where I can find a membrane, and lcd for a clamshell?

[crankwalk]

PMs sent - Liam I'm sorry I don't have access to a 2k2 membrane or LCD pad - your best bet would be to check our BST threads here, folks sell and/or part-out all the time. I have one Alias membrane pad laying around but I don't believe that helps you much...

[bizmarck]

i just received the kits in greecce. they were here about a week ago but the greek post office was on strike.... thanxs crankwalk. pming for more...

[crankwalk]

bizmarck: glad to hear the items arrived safely, sorry you had to wait an extra week due to the strike!

PM'ed you back

[mustard hole]

Crankwalk can I get the "Complete" 2k2 SS screw kit ($15.00) from you? I use paypal!

[bigkiduk]

another order to the uk please

im after

high flow hose x1 @ $1.00
high flow barb x1 @ $2.75
dual 9v halo mod x1 @ $3.00
alias Trigger frame mounting screws x2 @ $0.50ea
macro line x2 @ $1.00 black please

thankyou

dan

[crankwalk]

PMs sent guys!

[Spider]

pm sent

[mustard hole]

Crankwalk,
Im ordering a 2k2 screw set, but would also like to get two airbabrbs that fit a 2k2 front block. I pm'd you with the info.

[crankwalk]

No problem, replied to all PMs

[timmypr]

Need 4 barb fittings with hose and 4 clamshell screws for a classic
Shipped to 00921

[crankwalk]

timmypr: sent you a PM!

[braaatz]

PM sent

[snyper1982]

Do you have a high flow hose and barb kit for the alias? I would like enough high flow barbs and hose for a complete rebuild of the hose and barbs on my alias. I also need a stainless steel screw set for my alias, as well as both eyes. I might as well go ahead and get an o-ring kit and o-ring pick while I am at it.

Quick question, I noticed, you sid it does not come with the u-cup and the square reg o-rings but comes with round o-rings in place of those. Are they more prone to leak, not last as long, etc? Just curious, why the manufacturer would include those if they are not needed.

One last thing, does the oring kit come with the o-rings that go around the eyes?

[crankwalk]

PMs sent

[rougespear]

i need Complete Alias SS screw kit(10)
12 shipped
pm with paypal info

[crankwalk]

rougespear: PMed!

[fprandy]

Ordering Hose, Lube and other misc repair parts. Can you ship Priority Mail?

Thanks

[crankwalk]

I can ship Priority for a few more dollars over the standard shipping rate. You have PM.

[lopez17]

Crank. I need two harnesses and two Alias gripframe (to body) screws. I hit you with a paypal.

[rockinthegz]

hey, ill take a alias battery harness

[crankwalk]

lopez, I got the loot thanks :tup:

rockinthgz: pm sent

[njbus435102]

interested in
2- trigger piviot screws
2- sets of alias frame mounting screws
1- 9volt halo conversion

Pm on here or PBN same name thanks!

[crankwalk]

njbus435102: PM sent!

[KtO]

looking for that "Extended" 2k2 Clamshell SS screw kit if you still have any. thnx

[crankwalk]

KtO: PM sent!

[Nj_Balla791]

Hey bro I need that d2/alias battery wire extremely bad for my dragon timmy, it's the last part I need to officially 2k5 it. all I have is 10 in paypal though. Would you possibly accept that? Let me know.

-Mike

[crankwalk]

Nj_Balla791: you've got PM

[wisemanlax29]

hey crank...
need eye harness, 3 hi-flow barbs, 1 ft hi-flow hose, o-ring pick, thanks

[crankwalk]

wisemanlax29: no problem, you have PM

[HolySokz]

Hi crank i'm gonna need 4 hi flow barbs and 2 ft hiflow hose. Please Comes to 15 So it's all good XD

[crankwalk]

HolySokz: check PMs!

[Alias2007]

PMed you a order

[crankwalk]

Alias2007: received, thanks!

[kapa26]

can you tell me how i order parts with you
i want battery harness for a timmy a bomb and 9v battery upgrade lead for reloader b hopper
Do you ship to uk? how much?

[crankwalk]

kapa26: I absolutely ship to the UK, some of my best customers are there :D

check your Private Messages

[ALENONE]

Crank: PM me about some screws and a few ram bumbers. That is what failed in my sons marker Saturday. It is located in the ram. We are using an adjustable Ram Cap. We beat the end off the ram bolt. We cut the bad area and reassembled to get it to work. Let me know and foward me a price and address.

Lenny

[Spider]

Hey Crank, I need an alias/d2 battery harness and some triflow.

[crankwalk]

PMs sent to you guys, thanks!

[big willie]

Hey Crank let me get 3 pieces of macro line. PM me the total

[jay814u]

pm'd you on an order thanks

[hype]

Hey man did you get the laser eyes back in stock ???

[crankwalk]

hype: sorry man I don't carry Timmy laser eyes anymore

[auz11]

PMing you an order, thanks.

[crankwalk]

auz11: Sorry for the delay, you have PM

[IRStookmySpyder]

I might be back soon to pick up a 9v mod for a Halo and a 0-300PSI gauge. I will send you a PM when I get closer to needing both.

[crankwalk]

No problem, contact me anytime

[pbfrenzy44]

hello crankwalk. i would like to get: 2 battery harnesses, 1 high flow barb, an alias lpr set screw, 2 2k2 ram sleeve set screws, and 2 eye cover screws. if you could pm me with a total price and info i can send u a paypal as soon as i get it. thank you.

[lopez17]

I need a price on the following:

Two Eye Harnesses
One Battery Harness
(4) Upper board screws
(4) Lower board screws
(12) Grip panel screws (the kind that hold your BL grips on to the gripframe)

[crankwalk]

You guys have PMs :cheers:

[jay814u]

need alias battery and eye harness please
:cheers:

[lewdogg21]

Need the following:
(2) eye cover screws for 2k2 eye covers - $1.00
(4) rubber grip screws for 2k2 clammy (I have think dark seoul grips and am looking for the shallow screws with rubber o-ring to not screw into my battery or board) - $2.00
(2) feet high flow hose - $2.00
(1) High flow barb - $2.75
(4) 2k2 ram sleeve o-rings - $2.00

Total $9.75 + $2.00 (shipping) = $11.75

I just need your paypal id.

[crankwalk]

PMs sent to all!

[lewdogg21]

Got the stuff. If you want to do feedback give me the pbnation link to your stuff. Thanks again man. I got it on Friday for the weekend. Amazing!

[auz11]

PM'd you

[Zbomie]

Hey, I'm interested in some cocker hose. I just need a foot, and I can add the 2 for shipping. Toss me a pm bro.

[Zbomie]

Hey, still waitin for a PM bro. You can pm here, but I'll prolly do see it faster if you PM me on nation. Same name here as there.

[crankwalk]

PMs sent!

[jay814u]

crank i need 05 wiring combo with eyes do you have them? if so paypal you asap need asap thanks bro

[crankwalk]

jay i shot you a PM

[jay814u]

jay i shot you a PM
paypal sent thanks

[Empire08]

pmd you

[crankwalk]

PMs sent thanks guys

[Jcrock17]

hey just wondering how much it would cost for 2 barbs shipped to Canada would cost

[crankwalk]

Jcrock17: on that order no extra cost to ship to Canada - check your PM

[thedonnamc]

Hey,
I need eyes for 2k2 Dragon. Also, need a 160 and 300 gauge. Pm me info. Thanks.

[crankwalk]

thedonnamc: sent you a PM!

[KtO]

OK if still available id need :
- Boxed" 2k2 SS screw kit
- 1 ft of macro black prefered but doesnt matter.
- 1 ft of autococker hose

**Just wondering if the high flow barbs are ONLY for the high flow hoses. if they are not id need 1 barb also.**

thnx a ton :tup:

[Nj_Balla791]

ok so i found out the reason to why my gun is shooting so low. i grabbed a bunch of barbs from my techs bench and he is a autococker tech. they are all high pressure barbs. i need all lp barbs now and im ****ed cuz i ordered parts from u and i was going to grab the barbs as well but decided not to. but now i need them lol. If you have 6 barbs and can give me a price on 6 of them lmk that'd be great.

[crankwalk]

PM'ed you guys

[zeoalex]

Hey crank, i'll grab 6 barbs and washers, and 2 ft of hose please?

[crankwalk]

zeoalex: check PM

[Stewey956]

Bought Eyes #2 and battery harness.

[crankwalk]

Stewey956: thanks for the purchase, very much appreciated

[groupc]

3 alias grip frame screws please pm me with total cost and paypal address to send payment

[crankwalk]

groupc: PM sent

[wisemanlax29]

crank: need 4 barbs, ft of hose (hi-flow) thanks...

[crankwalk]

wisemanlax29: check PMs :tup:

[Jcrock17]

thanks for the great parts, defently do some business with u

[Squirlly]

**Shipping is a flat rate fee for all items - PLEASE ADD $2.00 TO ALL ORDERS FOR SHIPPING.**

I do not accept trades. I accept PayPal, MO & cash.

* Autococker hose ($1.00/ft)
General purpose low pressure tubing for Autocockers and has slightly smaller ID/OD than the Intimidator hi-flow hose above. Can also be used to replace hose on Classic and 2k2 Timmys that have their original "standard flow" barbs installed.

* Alias o-ring kit - 1 complete marker rebuild ($6.00)

* O-ring pick ($2.50)
If you've ever had to remove the small poppet o-ring you will REALLY appreciate this item.



Alias:

* Trigger frame screws - 6 per marker ($0.50/ea)

Blackout Screw Kits

* Dow 55 - Timmy Lube ($4.00/ea)

Ok let me see if I have this right. I want...
$1.00 - 1' of 'Cocker Hose
$6.00 - Alias O Ring Kit
$2.50 - O-Ring Pick
$1.50 - x3 Alias Grip Frame (Clamshell) Screws
$4.00 - Dow 55
$2.00 - Shipping to me
------
$17.00 - Paypaled?

Now I have only ever used my paypal account when associated with an ebay or amazon transaction and it's ONLY attached to a credit card and I know some paypal accounts can't accept cred card payments so let me know what the next step is. I'm HOPING to get this before next Saturday since I have a game then and I've been using Dow 33 for a year on my Alias and since it don't swell the o-rings I don't want problems and want 55 ASAP!

-Tim

[crankwalk]

You've got the price right - and my account is fully upgraded to accept all types of payments, credit card included. You've got PM.

[MoistTowelette]

I'm in need of the following

Qty - 1 - Alias/D2 battery harness ($10.00)
Qty - 1 - 06/Gen4/Defiant 2 eyes ($20.00)
Qty - 2 - Alias Trigger frame mounting screws - 2 per marker ($0.50/ea)

Shipping to Ontario Canada (N2L 0A1)

Thanks

[crankwalk]

For sure, check your PM MoistTowelette

[KtO]

Need 1 barb, i know its probably stupid to ship** just 1 barb but i owe my friend a fixed gun lol

[crankwalk]

check PMs KtO

[corey022682]

hey crankwalk i broke my barb that connects to the front block. will these hi flow barbs fit it? cause it is smaller then the other ones. if so i need 2 barbs, 1ft of hi flow hose. hit me back with a finally price shipped. thanks a but man.
corey

[crankwalk]

yes it will fit perfectly, check your PM corey022682

[812many]

Need 2 clear detents and some dow55 please. Will pay extra for shipping if it can get to me by Saturday.

[crankwalk]

812many check your pm :tup:

[Barnhill]

I would like some Dow 55, a battery harness, and an O-Ring rebuild kit for my Alias. I am just gonna send a MO if thats ok (easier than having to wait on the money being transfered in to my PayPal), so include an address and who to make it out to in the Pm with the total.

I just thought about it and I dont need the bolt orings, will that change the price?

[crankwalk]

PM sent Barnhill!

[Barnhill]

Thanks! I will get that to you ASAP!

[Ollieleet]

Need some Triflow, Dow 55, and a 2k2 rebuild kit. please pm me the total :)

[crankwalk]

PM'ed ya Ollie

[p8ntballben2004]

i need parts! pm'ed crank

[crankwalk]

p8ntballben2004: replied, thanks!

[an94]

I need
1-Alias o-ring kit
2-Clear detents
1-Dow 55
1-300psi mini gauge

are you on the nation? If so PM me there under the same name "an94"

[crankwalk]

an94: yeah I'm on pbn but I just PM'ed you here with a question about the parts you asked about.....

[toolittletoolate]

Can you PM me the total for
1-Dow55
2-2k2 trigger frame mounting screws
Thanks

[crankwalk]

toolittletoolate: sent PM

[battlechaser]

Pming you my list!

[123shots your dead]

do you have boards for a 05?

Will you ship to Canada?

[crankwalk]

battlechaser: got it, thanks!!

123shots your dead: I absolutely ship to Canada.. but I have no boards right now sorry

[dimsum]

do you have a wiring combo for gen 4 timmys?

[crankwalk]

Yes I have a combo available.. I sent you a PM

[‹GOD›]

Hey crank, I'm in need of a sending (I think) eye (clear) for my 2k2. I've discovered the metal casing in the old style diodes like to short circuit when in contact with the body and cause the board to over heat. I've had heat spikes from 150-250° F.

PM me a price if you can help me out.

EDIT:
Whoops... I signed in on the wrong account, this is GOD haha. If you don't get a reply from me 24 hrs after you PM me (if you do) catch me on the nation with this SN.

Thanks :tup:

[crankwalk]

sent PM!

[charles_ponter]

I am in the market for 1 Gen4 O ring kit,1 009 O-ring (for the middle of my poppet), 1 bottle of Tri-flow, and 1 container of Dow 55.
And If you have trigger frame clamshell screws for an infamous in black I would like one please.
Pm me a total. Paypal OK right.
Thank you!

[crankwalk]

no problem - PM sent!

[Kuzzy]

id like to get 2 Intimidator stiff (clear) detents
1 2K2 Trigger frame mounting screws
and 1 2K2 Solenoid screw
PM me price with shipping thanks

[crankwalk]

Kuzzy: PM sent

[J.Ross]

LMK if your willing to ship to ontario, I might need some stuff, pm me

[crankwalk]

Yes I ship anywhere internationally. Check PMs!

[Grimesb09]

is the 05 wiring combo everything you need as far as wiring to 2k5 a 2k2 timmy
thanks

[crankwalk]

Everything except the membrane pad. Drop me a PM if interested or have more questions :tup:

[Omega Ra]

Question. I need grip screws. I have a 2k5. Would I get the Alias Screw Kit or the 2k2 screw kit, same goes for the o-ring kit, which would I get as I have an Alias Ramsleeve and Half-delrin ram, adjustable ram cap and a 2k2 front block..I'm so confused lol.

[crankwalk]

Omega Ra: modified Alias screw kit and same goes for the o-ring kit - PM me

[kapa26]

I'm after timmy eyes and membrane buttons
I know you supply eyes but can you get membrane buttons, and cost please

[crankwalk]

kapa26: I don't have any membrane pads I'm sorry - I can help you on the eyes and lots of other Alias wiring and spares though

[Black Six]

I need
3 - Ram Bumpers for a 2k5 (Not sure if theres a difference)
1 - DOW 55
2 -Dual 9v Halo mod
1 - Alias style blackout kit (Again, for a 2k5, but I think they are the same)

And possibly a battery harness for a 2k5, I need to hear back from a friend

Please PM total with shipping to Nova Scotia

[crankwalk]

Black Six: sent you a PM

[ilivlife]

Hey man
I got the alias kit and I love it
I need some more parts
screws for my ripper now (front block set screw and ram sleeve retaining set screw)
I also need to know how soft those kevlar hand protectors are
Also I need a crossfire Tank Guage too
PM Me

[KtO]

hey crank need the following
0-160psi mini gauge
2 barbs
dow 33
6 2k2 sideplate screw
2 2k2 lcd screw
2 detents

lmk paypal waiting :tup:

[crankwalk]

OK guys pms sent sorry for the delay

[paintalloveryourface]

(1) Universal trigger pivot screw - fits 2k2 and 2k5 ($4.00/ea)
(1 Foot) Autococker hose

I was also wondering if you have any stock barbs or barbs that are stronger but still stock barb size??? If so I need 5 of those.

PM me with total and where to send the paypal. Thanks!

[Squirlly]

I was also wondering if you have any stock barbs or barbs that are stronger but still stock barb size??? If so I need 5 of those.

You need 5 barbs? with that many being replaced why not just upgrade to all High Flow Barbs/Hoses in that marker?

-Tim

[groupc]

please PM me for
alias eye harness , orings for alias poppet and ram
do you have alias poppets

[paintalloveryourface]

You need 5 barbs? with that many being replaced why not just upgrade to all High Flow Barbs/Hoses in that marker?

-Tim

Cause I just got an evil front block and it has a brand new one already on it. Hence the 5.

[crankwalk]

PMs sent guys!

[lipe33]

Check your PM's

[crankwalk]

PMs replied to!

[dimsum]

please give a price for a 06 timmy harness and eye combo.

[crankwalk]

dimsum: you have PM

[heisman01]

pm me a price on 3 barbs 4 detents and some gen4 eyes for a dragon timmy (if u can do those?)

[crankwalk]

heisman01: Yes I've got the correct length eyes and eye harnesses for a Dragon or 05'd Species - check PM

[SpyderMan723]

PM'd you crank

[crankwalk]

SpyderMan723: back atcha!

[juggernautic]

hey crankwalk,
do you sell the o-ring that goes on the end of the reg of the tank, the part that screws into the tank? Also, i took my bumper off my ram because it wasn't letting the bolt clear the feed neck (i do have a hybrid adjustable bumper, which i still had to trim the rubber off that to let the bolt clear the feed neck) So my question is do i need the bumper??

thanks a lot.

[crankwalk]

juggernautic: replied to your PM!

[steve010101]

Any marq oring kits?

[crankwalk]

steve010101: Ah sorry no not at this time - currently working on Protege/Vice kits so maybe after I complete those

[rabbit]

crank, need a price for 6 high flow barbs, and 2ft of high flow line shipped please. zip is 86314

[crankwalk]

rabbit: sent you a PM! :tup:

[cBomber220]

Is it possible to get the team kit for an alias style(abomb) but rather then the bumpers could i get some clear detents? Ill pay extra if needed.

Also will the hi-flow timmy hose work with stock internals?(its says its larger then stock hose)

The timmy im picking up has a bumperless ram cap so i guess i don't need bumpers. Im a bit of a timmy newb so please feel free to correct me.

[aquabat0587]

I would like to purchase some gen 4 timmy eyes. The wires in my harness came out and i couldn't repair them. I would like to get them as soon as possible. Let me know how I need to check out.

[crankwalk]

Sorry guys I was out of town this weekend w/o Internet access.. I've sent out PMs :tup:

[Vidar0]

pm me if you have a Black Screw Kit for 2k2 timmy...ty

[Killian! UDOWN?]

Got a 35 dollar money order for
Alias eye harness
Intimidator eyes
Alias o-ring kit

[Squirlly]

Got a 35 doller Moneyorder

Be careful Cranky I hear the doller market is much lower than the U.S. Dollar :runaway::runaway:

-Tim

P.S. Just kiddin' I speak fluent typoeeze but on the serious side some people "typo" on purpose to scam!

[sunfisher89]

Sent you a PM.

[dimsum]

i need a price for 2 set of eyes for the gen 4 timmy

[crankwalk]

Vidar0: sorry man I don't have black 2k2 kits - just Alias and Gen4

Killian! UDOWN?: we talked via PMs - the MO is fine

Squirlly: lol

sunfisher89: back at you :tup:

dimsum: PM sent!

[AirSin]

I'll take an Alias battery harness please. PM me your paypal addy.

[Daigz525]

crank

email me, I need a ton of stuff for my alias project...

[crankwalk]

PMs and Emails sent!@

[cBomber220]

sent you a pm about adding something to an order