PDA

View Full Version : random anno question

outreach
02-28-2010, 04:07 PM
3 things ive always wondered are:
1 if a body has been heli coilled can it be re anno'd?
2 the bodies that have been punctured then repaired with jb weld are they able to be re annoed?
3 how do i get the ironmen metal jewels out of the body to anno them a seperate color?
GOD
02-28-2010, 05:09 PM
1: the helicoil must be removed prior to ano
2: you need to ask the anodizer, it's possible the ano stripping agent will remove it and it will need to be fixed again after ano.
3: heat will probably be your best bet
necrolyte
03-17-2010, 07:13 PM
When I had my Abomb done, the body was close to being punctured, but it had been jbwelded on the front frame screw, and when I got it back the jb weld was gone. I'm assuming the acid ate it away, and I had to repair it again. It's a simple fix though.
gajones06
03-22-2010, 11:32 PM
not meaning to take over ur thread but since its a thread on annoing i will jsut ask in ehre vs. making a new one. I was wondering if your going to have someone do a fade anno do you need to totally disassemble the gun? im just wondering so i know before i ship my gun out.
toolittletoolate
03-23-2010, 01:52 AM
not meaning to take over ur thread but since its a thread on annoing i will jsut ask in ehre vs. making a new one. I was wondering if your going to have someone do a fade anno do you need to totally disassemble the gun? im just wondering so i know before i ship my gun out.

When you're going to have ANY ano done all the parts need to be fully disassembled. If you do not, they will A, not ano your gun, B, disassemble it for you and charge you like $60.
gajones06
03-23-2010, 02:06 AM
well my next question would be how do they get a fade to match?
toolittletoolate
03-23-2010, 02:19 AM
They dip them at the same time. Bottom line is, you need to have your gun COMPLETELY disassembled before you ship it to them. No orings, screws, boards, detents, etc, should be left.
oldironmudder
03-23-2010, 10:15 AM
3 how do i get the ironmen metal jewels out of the body to anno them a seperate color?

3: heat will probably be your best bet


The jewels are glued in. Ive seen a few pictures where they were missing & it was just a line of some form of glue.