Gen 3 Alias frame question

[bigdaddyreg]

I purchased an Alias, and I see with some intimidators you can take the reg off without taking off the 90 degree fitting off the reg. Is there something I am doing wrong? also is there a larger frame (trigger guard) for people with fat fingers.

[gamer565]

You could be able to take the reg off no problems with the frame still on. Unless the macro fitting is to long and is up against the trigger guard.

[oldironmudder]

It depends on the trigger guard & fitting. If you get a straight macro fitting & a 90* street elbow, it will clear.

This is the stock Torpedo & a swivel 90* macro fitting, wont clear.
http://i117.photobucket.com/albums/o54/drunknmudder77/BLAST/alias1.jpg

I dont have a picture of the elbow & straight macro fitting, but this is close enough. See how much closer the hose is to the reg?
http://i117.photobucket.com/albums/o54/drunknmudder77/BLAST/spring2010guns003.jpg

[DFSniper]

i think most straight(ish) trigger guards will clear it. as mudder said, a 90* fitting with a hose/macro fitting attached will work best.

[bigdaddyreg]

It depends on the trigger guard & fitting. If you get a straight macro fitting & a 90* street elbow, it will clear.

This is the stock Torpedo & a swivel 90* macro fitting, wont clear.
http://i117.photobucket.com/albums/o54/drunknmudder77/BLAST/alias1.jpg

I dont have a picture of the elbow & straight macro fitting, but this is close enough. See how much closer the hose is to the reg?
http://i117.photobucket.com/albums/o54/drunknmudder77/BLAST/spring2010guns003.jpg

Yes my frame is just like the first picture, here is my gun
http://i69.photobucket.com/albums/i49/bigdaddyreg/Timmy/IMG_0100.jpg and before you say, i did not move the macro line like that, either way once you remove the macroline it still hits the frame. Also can i dremel that second piece of the trigger guard to make a little more finger room?

[rabbit]

reggie, i've found that the species and lasoya trigger guards have a little more room. not sure if that's going to help your sausage fingers, but it may.

[outreach]

stock 2k2 trigger gaurds work well, also even though its off topic wtf is with the little star and f on your trigger frame 0.o

[gajones06]

ya i kinda custom hacked my trigger guard like ur thinking..looks good as hell can send u a pic when i get it back from anno

[gamer565]

stock 2k2 trigger gaurds work well, also even though its off topic wtf is with the little star and f on your trigger frame 0.o

The F with a star is a European stamp to show the gun cant chrono over a set FPS(I believe it 250fps).

Pretty sure all paintball guns ever there have to have that or else you get in trouble.

[DFSniper]

actually 214 fps (14 joules). and tampering it voids the stamp. makes me wonder is there a SN on it too? because i heard all stamped guns have to have SNs from the shop that stamped it and a registered number for the gun.

[outreach]

they only play at 214 fps 0.o, talk about bounces and ball arcing

[gamer565]

they only play at 214 fps 0.o, talk about bounces and ball arcing

It has something to do with the firearm laws and government.

[bigdaddyreg]

ya i kinda custom hacked my trigger guard like ur thinking..looks good as hell can send u a pic when i get it back from anno

please do send a picture

[bigdaddyreg]

The F with a star is a European stamp to show the gun cant chrono over a set FPS(I believe it 250fps).

Pretty sure all paintball guns ever there have to have that or else you get in trouble.

Why do i not see that on other frames??

[DFSniper]

Why do i not see that on other frames??

only german frames have it. read my previous post.

[gokdaddy]

I use a non-swivel 90* macro and it clears a ripper trigger guard.