Emprie 2005 Intimidator Board Problem

[Bartko]

The stock board sometimes turns off when I pull the trigger. The battery is ok, and I've tried the other boards (with the same wiring) on this gun and theres no problem.

[crankwalk]

Then it sounds like there is something wrong with your board or microswitch.. if other boards work with the same wiring that basically rules out the wiring..

[Gee Tee]

I had a similar problem on mine. It didn't turn off just sometime refused to cycle & was really intermittant. Swapped the board for a lucky ACE chipped one and it's been fine since :)

[Romeo Joker]

Crank is on this one. I've got a 2K5 Empire with the stock board, and when I had the board out, it started doing the same thing. When you have it back in the gun it is fine. The only thing mine does is the noid doesn't come on right away, I've had to resort to bumping the bottom of the gun and it works.