Changing bodys of Timmys

[Jester of Paint]

So I have a Gen 2 Lasoya and I'm thinking of getting a new body. It will probably get a Gen 3 body (liking the RL) so I just need to make sure of the things I will have to do. Just running it past you guys to make sure.

*I think I need a new bolt, is that correct and what style do I need?
*I won't need a new ramcap since I'm bumperless?
*I need a new front block only if it is alias style or all of them tapped for it?
*Do I need to get a different popit or ramsleve?
*Have eingram so I don't need a different ram?

Is there anything else I'm still somewhat of a timmy noob :p.

[crankwalk]

Hello and welcome,

1. You'll need an Alias style bolt with any Gen3 body (with the exception of the Empire body, which is more of an inbetween Gen 2 and Gen 3)

2. your existing ram sleeve/ram cap/ram/poppet assembly will slide into the gen 3 body with no problem

3. all gen 3 bodies are tapped for an Alias front block..

[Jester of Paint]

Thanks.

[crankwalk]

No problem, please feel free to post again or ask more questions regarding the body upgrade.

[Jester of Paint]

I have another question. If I throw in this noid http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=MAC-43A-AAA-XXXX-1BA&Category_Code=SOLENOIDS

Will a 3 watt work or do I need something more powerfull?

[crankwalk]

I'm not sure about the wattage off hand... but first you want to make sure if that noid has M3 threaded ports to support Timmy barbs? and also it doesn't come with a connector so you'll have to custom wire it up yourself.

[Jester of Paint]

Alright. Thanks.