Ironman Timmy NEED HELP!!!!!!!!!!!! please

[aggie1208]

i am trying to build my first timmy. i am having trouble with the internals. i got the board hook up and the eyes but i need help with hookin the noid up. im new to the timmy world and i need help. so if someone is kind enough to help me that will be great. thankssss

[crankwalk]

Hello and welcome! Basically you need to situate the noid so that the side that has one barb is facing the front of the marker and the side that has two barbs is facing the rear:

http://www.intimidatorowners.com/forums/files/images/step5.JPG

The hose that comes from the front facing barb will connect to the barb on your front block.

The hose that comes from the upper rear facing barb will connect to the front barb of your ram sleeve.

The hose that comes from the lower rear facing barb will connect to the rear barb of your ram sleeve.

[Mystical-Dragon]

That helps

[crankwalk]

I should probably turn that 2nd post up there into a thread in the Articles section :)

[Slimpikins976]

Yeah Like crank has that listed, if you look at some of the articles under maintenance and such there is a ton of information there that would be very useful. Post more questions and we will get your gun up and running Welcome to the boards aggie1208...