Perfect Marq !! ?? !!

[Slimpikins976]

ok guys time to give smart upgrade options !!!

Myself and my MuMMy want to say thanks in advance !!

So far I got the sickest board to ever run a paint ball gun to be its engine and I will go from there.

Tadao Yakuza Board - WHAT !!!

http://img86.imageshack.us/img86/5402/fea11uv9.jpg



Spare no part, if there is an engram ram for the Marq I need to know hehehehe !!

Thanks guys !!!

[jrmiller]

nope no engram ram for the marq. but that is a sick board.

[crankwalk]

That's an awesome board.

From what I understand Mummies already come with a bunch of aftermarket parts. However, I'd recommend you take a look at the POWER triggers, I have a "Kodachi" on my Protege and its great.

POWER website (http://home.bellsouth.net/p/PWP-powerpb)

Also you may want to take a look at the Marq Pillow Bolt (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start?ProductSKU=011-200-0004)

[mcsquid86]

I think that's the board Lopez17 has in his new vice. Wicked looking...

[superbuddha14]

What are all these POWER triggers about haha. Are there any for timmies?

[the incubus]

None for Timsters. Sorry, but there were waaaay too many Triggers out there for me to invest in manufacturing yet another option for them.

As it is, most companies who made them have a ton of stock they're not moving which means I made the right decision. ;)

You could always buy one of my POWER Triggers and then pick up a VICE, Protege or MARQ to go with it. :D :tup: :P

[superbuddha14]

lol I'm thinking about a vice sooner or later, I'm finishing up the Ripper1 soon, hopefully I can get a good sell from it and pick one up

[Slimpikins976]

Ok, got new RF chip hooked up and installed in the gun. Since there is no wiring harness for the battery This took probably a total of five minuets to slap in my gun....
Bang Pow !!! but I did notice a small problem.... the grips sent with the Tadao Yakuza Board seem to create a gap between my left grip and the frame of my gun. I took my gun apart two or three times and the LED screen is sticking up causing this small gap. What I do not understand is the grip comes with a cutout so you can see the LED but its on the outside of the grip. If it was on the inside all my troubles would be fixed.
I just do not desire mashing or breaking hte new board I just put in AHHAHAHAH !! ill post pics in a few days im feeling lazy now and need to find my camera.

[fprandy]

Hello! Tadao is having the same problems with the Yakuza board and the Dye Ultralight gripframes. Be sure to send him your comments.

[Slimpikins976]

Cool I was hoping I was not the only one ... Swamped in school I'll post picks this weekend guys !! thanks for the heads up Fprandy...

[b-nizzle]

what problems are you guys having?

[DOC-07]

read the thread nizz, sheesh, lol just kidding buddy, the lcd is sticking above the gripframe surface causing a gap when the grips are installed, they need to make the grips with the cut out on the other side of the grip(inside not out...).

[b-nizzle]

sorry spaced out there!

[DOC-07]

its all good, and as far as upgrading a mummy, there isnt realy much to do, besides the trigger and board, everything else is up'd from the factory.

[Slimpikins976]

Just got a Magna Hopper I LOVE it already. Sits a few inches back the entire weight distribution on the gun has changed, love it ! Now my whole mummy is Rf linked it was so SO SOOOoooo.. easy to link the gun to the hopper.... cant wait for practice on Saturday and Sunday :D .

Im a broke college student so I put several hundred dollars worth of book under my Gat !
heeheh College = Empty pockets


http://img141.imageshack.us/img141/7532/dsc06616of9.jpg

I know a guy who does laser engraving I want to get Slimpikins Done in old school graffiti Mabey newyork arrows..... anyone good at drawing????

[crankwalk]

VERY nice! And I do love the textbooks underneath :D

[DOC-07]

chemistry major im assuming, nice setup you have there!

[Megatron]

I know a guy who does laser engraving I want to get Slimpikins Done in old school graffiti Mabey newyork arrows..... anyone good at drawing????
my girlfriend will do it, if you're serious about it, she's an artist:tup:

[lopez17]

Make sure your board is positioned correctly inside of the frame and screwed down both top and bottom. It should fit without the spacing problems inside the Marq/Protege/Vice frames. The Yakuza boards are simply amazing. I'm very impressed with mine.

[Slimpikins976]

Ok here is a Pic of my problem, I sent a E-Mail to Tadao tonight with the same picture plus a few more so I will keep you guys updated. The white you are seeing threw the grip is the RF wire, When I went out and played this weekend in Jacksonville I got *bonus balled* in the hand and the paint flew right in the gap about 3 to 5mm and I had to take everything out ( Board Rf chip wires, Battery, ect to clean it all up...
Geeze it stunk but Hopefully there is an easy fix to this. and the Magna Hopper IS AWESOME !! love it Love it LOVE IT( still got to train my arse to not throw paint 3 inches further back when reloading LOL I dumped more then a few pods while reloading :P ) because of the whole set up of that hopper is different.

http://img525.imageshack.us/img525/7684/dsc06622kh7.jpg

[Slimpikins976]

Ok got the problem with the board fixed. the Tiny LCD board that sat on the gun was actually being obstruced( just barely) to cause the bow in my grips. I removed the screws that held the trigger assembly in and moved the board around and now it sits just fine.
heheh the Tech at Tadao walked me threw that .... man I felt silly but I am glad the gun is sitting pretty.

[Slimpikins976]

OK next up grade I went with is the snap on two piece bolt assembly with a new pillow bolt. This is a great upgrade and to any marq owners .
This would be my first upgrade.
Now I do not need to wait 24 hours to shoot my gun after I lube or mess with any of the guns internals. And this saves a few bucks on having to buy blue Locktite every time you mess with the guns engine!!!!