juit
08-07-2010, 10:32 AM
if you want to cut the bolt do this:
http://i494.photobucket.com/albums/rr301/juitpower/RSCN0107.jpg
unscrew the allen stop
get a file same spring diameter
mark the file with the spring lenght
drill the hole till your mark
clean the hole
insert the spring
put the bb inside
then slowly push the pin and with a sloted screwdriver push the bb at the same time push the bolt pin
I use a common saw and cut it then I polish it with sand paper
Now you have a shorter & cool looking bolt!
http://i494.photobucket.com/albums/rr301/juitpower/RSCN0107.jpg
unscrew the allen stop
get a file same spring diameter
mark the file with the spring lenght
drill the hole till your mark
clean the hole
insert the spring
put the bb inside
then slowly push the pin and with a sloted screwdriver push the bb at the same time push the bolt pin
I use a common saw and cut it then I polish it with sand paper
Now you have a shorter & cool looking bolt!