vice protege poppit in a alias ram sleeve

[juit]

Hi guys anyone done this?

put a vice cup seal in a alias poppit

BLAST tech told me that vice cupseal is better than the alias
better flow etc.

so I want to do this and see if this is true :dodgy:

vice cupseals look the same as spyders but they are plastic made not teflon

Im just going ahead and do it on my small bench drill and see what happens

if someone has done this please input some pics and results please

update:

YEP IT CAN BE DONE!!!

had do drill a bigger hole in the cupseal
need to reduce the top top the cupseal too
it seals perfect
that ram sleeve I messed up when I was learning to polish the valve port hole and this valve sealed
Ill test it when I finish this marker
if someone do it before me please post data

last update

I finally got out the screw from the eye plate on the new timmy body and put the marker all back together
set the lpr to 75-80 cant tell because its a older BL gauge
went out this morning to do some test shots
chrono it to 292-295 FPS to see if it had any leaks or something wrong
WTF? the sound signature was soooo wierd different in a good way like a marq runing in low pressure with the eff engine
then I remember that I put this poppit cupseal with the polished poppit
went back at my bench and test the PSI and that marker was runing in 135 PSI I degased it and regased and yes it was 135 did a dryshot and there it was 135 PSI
I dont know if it was because of a new body or the cupseal
did any one done this mod?
if so please let me know,
Im ordering more cupseals to put them on other timmys and see what happens


http://i494.photobucket.com/albums/rr301/juitpower/species%20project/IMG_0931.jpg

http://i494.photobucket.com/albums/rr301/juitpower/species%20project/IMG_0929.jpg

[fireduster]

How did you get the alias head off? The one on the vice unscrews correct?

[juit]

How did you get the alias head off? The one on the vice unscrews correct?

both can be unscrewed

alias cupseal has a bigger ID

so you will have to drill a bigger hole on the protege cupseal

[fireduster]

Ahhh ok, I'm guessing after you drill the hole that you can just use the poppet stem to make the threads?

[juit]

Ahhh ok, I'm guessing after you drill the hole that you can just use the poppet stem to make the threads?

Yes;)

[fireduster]

Awsome, I might have to try this

juit it seems like your on a quest to redesign the older guns so they run like new ones

[juit]

yep, right now Im working on the solenoid modification to run on lower pressure and better effcy, I hope it works

[fireduster]

Hmm care to let me in on what your doin?

[juit]

a bit complicated, we are still collecting parts for new noid new manifold new sleeve

[fireduster]

Keep me updated bud

[juit]

Keep me updated bud

for sure!
I just got all my time consumed with the ego bolt that I just made
and right now Im working on the cad for the new bolt for the G6R

[Doc ©]

... Im working on the cad for the new bolt for the G6R
Would be interesting to look at it.

[juit]

new update

[Fatty_Matty]

Holy crap another great idea. At this point I would say, time to build your own marker!

[juit]

I wish!