2k2 Texas Storm leaking

[k-Lin34]

hey guys i have a 2k2 texas storm intimidator and it keeps on leaking. it leaks around the bolt/ram sleeve and i think out of the front block. i've tried everything but i'm not too familiar with timmies. i was wondering if you guys know of anywhere i can send it, or if anybody on here can fix it for me. i would pay for any parts that would be needed and for the labor. i just really want this gun working 100% so if someone could help me i'd really appreciate it.
thanks

[jamrens@comcast.net]

i know blast would fix it but that would take about 2 to 3 weeks
its prolly just an oring. get a oring kit From crank and go threw it lubing and replacing orings it will make you knowledgeable on it.


WhIt

[k-Lin34]

i bought a oring kit from him and it still leaks and i really dont wanna try to fix it myself, i'd really like for someone thats good with timmies fix it.

[mustard hole]

I would try what jamrens said first, then check air hoses, then barbs. 3 minutes before the start of a tourney last weekend my sons timmey started leaking from the same area as yours. I changed the O-rings on the bolt and ram but it was still leaking. I took the clam shell off and kept the marker air'd up and started playing with the hoses. The hoses looked fine but when I moved it around there was a barely visible crack on the under side. (Start with the cheapest fixes first)!!! Good luck!!! if that fails ask Crank

[jamrens@comcast.net]

take it apart and mess with it and keep us informed we will always help with any problems you have

[k-Lin34]

would anybody on this site be able to fix it?

[jamrens@comcast.net]

talk to crank or maybe lopez they seem to be the most helpfull

[mcsquid86]

Try a new cupseal for the poppet. You might not know what that is since your new to timmys. It's the white plastic, vinyl washer where your poppet is. Then Lube your gun and see what happens. That's a cheap price on a part.

[k-Lin34]

ok i got it to stop leaking from the ram sleeve but now its leaking from the noid???
do i need to buy a new one

[jamrens@comcast.net]

probably

[GOD]

You might just need to adjust the barbs or hoses. If its a bad seal you might be able to fix it with some dow 55 depending on the location of the bad seal. I ve always offered marker servicing but it looks like you have it under control now. If something goes extremely wrong and you want it serviced, pm me.