crankwalk
03-03-2008, 11:51 PM
Basically you need to situate the noid so that the side that has one barb is facing the front of the marker and the side that has two barbs is facing the rear:
http://www.intimidatorowners.com/forums/files/images/step5.JPG
The hose that comes from the front facing barb will connect to the barb on your front block.
The hose that comes from the upper rear facing barb will connect to the front barb of your ram sleeve.
The hose that comes from the lower rear facing barb will connect to the rear barb of your ram sleeve.
http://www.intimidatorowners.com/forums/files/images/step5.JPG
The hose that comes from the front facing barb will connect to the barb on your front block.
The hose that comes from the upper rear facing barb will connect to the front barb of your ram sleeve.
The hose that comes from the lower rear facing barb will connect to the rear barb of your ram sleeve.