PDA

View Full Version : Need Help Fixing a leak.

Gat8rpb56
03-06-2008, 09:46 PM
Have a ND Timmy and there is a leak coming from the bolt chamber or what sounds like the bolt chamber. It sounds like it is coming from infront of the bolt.

I have already taken the ram sleeve out and checked all the orings. Still leaking.

Any and all help would be much appreciated.
snyper1982
03-07-2008, 04:02 AM
Sounds like the poppet or cupseal is leaking.
android17ak47
03-07-2008, 02:54 PM
It is most likely either the poppet oring. Replace it, and be sure to use dow55 upon installation of the new one.

It might also be your cup seal, but most likely it is your poppet.

One way to know the difference is by bringing your lpr down to 0psi, but keep the marker gassed up. If the leak stops, it is def the poppet oring. If it continues, its your cup seal.