PDA

View Full Version : Ecx timmy

tERDL
12-08-2010, 10:50 PM
i just got a used Ecx intimidator. The problem is that i don't know how to program the board. it seems to only have a power switch and a flashing LED. I took apart the grip to get to the board and i still can't find any switches. Could someone please tell me how i could program the board (especially how to changed the ROF cap) thanks.
gamer565
12-08-2010, 10:52 PM
We need to know what board you have first.

Post a pic of the board if you don't know.
tERDL
12-08-2010, 11:14 PM
im almost certain its just the stock board. Ill take some pics tho
According to pbreview.com the stock baord is the SOB board.
tERDL
12-09-2010, 12:03 AM
here are the pics
http://i1209.photobucket.com/albums/cc395/legin338/IMG_7846.jpg
http://i1209.photobucket.com/albums/cc395/legin338/IMG_7837.jpg
http://i1209.photobucket.com/albums/cc395/legin338/IMG_7836.jpg
GOD
12-09-2010, 12:19 AM
That's a Frenzy board, I believe the 2k2 manual will tell you how to program it via the LED. If not then you'll need to pick up a 2k2 LCD screen and 12 point harness or a different board.

Unless it has problems there's no need to program it as it's only going to have semi-auto.
the incubus
12-09-2010, 12:35 AM
The 2k2 Manual does not cover anything about this board as this is indeed a Frenzy board which came 3 years after the 2k2 manual was done. The one covered in the manual is an SOB Board which used Dip Switches to adjust settings on the board and is of no help for this. You need to call up BLAST and ask if they can email you a copy of the Manual. I think it does allow for programming via the LED.
tERDL
12-09-2010, 12:35 AM
thanks
icp-ms
12-09-2010, 09:26 AM
this should be the Boards Manual

DIP Switch Settings
The DIP Swtiches determine startup firing mode, rate of fire, eye status, and tourney lock. They changed in revisions 1.4.2 and 1.4.3, so these are listed seperately. Note that SOB settings are listed as well.

Firing mode, all mode equipped versions, Switches (1-3)
off,off,off - Semi Auto
off,off,on - 3-Burst
off,on,off - 6-Burst
off,on,on - Full Auto
on,off,off - Test
on,off,on - Turbo
on,on,off - Reactive
on, on,on - Unused (semi)

Rate of Fire, all mode equipped versions, Switches (4,5)
off,off - 9 shots/sec
off,on - 10.1 shots/sec
on,off - 12 shots/sec
on,on - 14 shots/sec

Delay (ROF Limiter), SOB, Switches (1-5)
off,off,off,off,off - 15
on,off,off,off,off - 16
off,on,off,off,off - 17
on,on,off,off,off - 18
off,off,on,off,off - 19
on,off,on,off,off - 20
off,on,on,off,off - 21
on,on,on,off,off - 22
off,off,off,on,off - 23
on,off,off,on,off - 24
off,on,off,on,off - 25
on,on,off,on,off - 26
off,off,on,on,off - 27
on,off,on,on,off - 28
off,on,on,on,off - 29
on,on,on,on,off - 30
off,off,off,off,on - 31
on,off,off,off,on - 32
off,on,off,off,on - 33
on,on,off,off,on - 34
off,off,on,off,on - 35
on,off,on,off,on - 36
off,on,on,off,on - 37
on,on,on,off,on -3 8
off,off,off,on,on - 39
on,off,off,on,on - 40
off,on,off,on,on - 41
on,on,off,on,on - 42
off,off,on,on,on - 43
on,off,on,on,on - 44
off,on,on,on,on - 45
on,on,on,on,on - 46

Forward Dwell, version 1.4.1, Switches (6,7)
off,off - 19 ms
off,on - 16 ms
on,off - 08 ms
on,on - 06 ms

Forward Dwell, versions 1.4.2/3 & SOB, Switches (6-8)
off,off,off - 20 ms
off,off,on - 18 ms
off,on,off - 16 ms
off,on,on - 14 ms
on,off,off - 12 ms
on,off,on - 10 ms
on,on,off - 8 ms
on,on,on - 6 ms

Ball in Place Delay, version 1.4.1, Switches (8,9)
off,off - 15 ms
off,on - 10 ms
on,off - 5 ms
on,on - bypass a/c eye

Ball in Place Delay, versions 1.4.2/3, Switch (9)
off - 1 ms
on - bypassa/c eye

Tourney Lock, all versions, Switch (10)
off - tourney lock disengaged
on - tourney lock engaged
the incubus
12-09-2010, 10:50 AM
^^^ Excellent find icp-ms... Too bad that info is for SOB Boards ONLY. This man's board (as stated a few times in here already) is a FRENZY Board which has NOTHING to do with the SOB and those ^^^ instructions.
tERDL
12-09-2010, 07:07 PM
My board appears to have no dip switches whatsoever...
tERDL
12-09-2010, 07:32 PM
i think this is the board i have
http://iisports.com/product.asp?dept_id=22919&pf_id=YZ2049A&s=iispaintball
toolittletoolate
12-09-2010, 07:34 PM
Yes, you have a Frenzy board. Check the ultimate sticky here for the manual or call BLAST and ask them to email me the manual if they have it.
tERDL
12-10-2010, 12:54 AM
That's a Frenzy board, I believe the 2k2 manual will tell you how to program it via the LED. If not then you'll need to pick up a 2k2 LCD screen and 12 point harness or a different board.

Unless it has problems there's no need to program it as it's only going to have semi-auto.
where can i get the lcd? will i need a new lower left reciever/grip? Also, what would be the best board to get for a low price?
tERDL
12-10-2010, 01:16 AM
it looks like using this board i will have to short out some stuff on the board. could someone explain what i have to do to put the mode to semi, debounce to 3, ROF uncapped, Dwell of 9?
the incubus
12-10-2010, 10:08 AM
You'll need the LCD and the Membrane Pad to adjust your settings but with this frame you do not have the option of mounting the screen and membrane. You will use the screen to adjust settings when needed and then power down and disconnect it and re-assemble the frame. It's a bit of a pain but once you get used to it it'll be a breeze.

You can also part out your frame and make up some of the money needed to acquire a full 2k5 frame setup that'll allow for a multitude of options such as LED, LCD or OLED. I recommend going with Frenzy or Tadao.
GOD
12-10-2010, 09:34 PM
You'll need the LCD and the Membrane Pad to adjust your settings but with this frame you do not have the option of mounting the screen and membrane. You will use the screen to adjust settings when needed and then power down and disconnect it and re-assemble the frame. It's a bit of a pain but once you get used to it it'll be a breeze.

^This.^
tERDL
12-12-2010, 02:54 AM
thanks. by the way, how much would my ecx sell for in its currents state? (all stock)
also, what are all the parts i would need? is it just the lcd and the membrane pad. it seems like i would need a 12 point harness.
toolittletoolate
12-12-2010, 05:52 AM
thanks. by the way, how much would my ecx sell for in its currents state? (all stock)
also, what are all the parts i would need? is it just the lcd and the membrane pad. it seems like i would need a 12 point harness.

A stock ECX will go for $100-$150. Depending on anno you might get more.
Ajak
12-12-2010, 03:24 PM
I got a mostly 2k5'd ecx for 130 shipped^
NEp8ntballer
12-17-2010, 09:20 AM
I need an ECX...
gamer565
12-17-2010, 03:14 PM
I need an ECX...

Then buy one.
NEp8ntballer
12-17-2010, 03:51 PM
Then buy one.
the only one avaliable right now is purple...