PDA

View Full Version : Low Pressure Regulator Washer

p8ntballben2004
03-12-2008, 11:06 PM
I just picked up an Gen4 and I was going through and cleaning it and I found it was missing the LPR washer that goes in front of the spring. I was wondering if this is a huge issue and/or where I could get one (besides BLAST of course). Just let me know!
BigRed76
03-13-2008, 03:24 AM
Email BLAST... seriously, they'll hook you up. Small parts from them are almost always free! Email them or call them, either way you'll get a response. Phone's a little quicker, though.
crankwalk
03-13-2008, 03:32 PM
If you don't want to wait on BLAST just go to your local hardware store and find one that fits.
big willie
03-13-2008, 07:10 PM
if you are going through BLAST call them it is almost always faster
android17ak47
03-13-2008, 07:42 PM
Most hardware stores will have the same size washer you will need for your lpr.
Gee Tee
03-14-2008, 08:20 PM
On the subject of LPR & HPR seals...

We recently re-built my mates Alias and found that the LP/HP seal (like my Empire) used a small flat urethane washer. None of our spares seem to cover this item, so we used a small white o-ring from the kit instead. My question is are these washer seals available, and if not what do you guys use?