PDA

View Full Version : Help setting up Alias


snyper1982
03-14-2008, 12:24 PM
Ok. I am trying to get my Alias up to snuff. I am basically looking for recommendations on parts, as well as setup advice. I have an alias with the latest version of Frenzy that is availible for my board 127.4 I believe, I haven't messed with my settings at all on it. The only after market parts I have in it are Violent Products Delrin LPR and HPR pistons, and an adjustable Ram Cap(Hybrid I believe). I was browsing some parts and saw an Empire Pressure Balance Ram Sleeve. Wondering if it is availible for my Alias first of all, and secondly if it is worth getting. Then I saw an Eigenram. Same questions regarding it. Also saw something about the poppet spring when using the Eigenram.

I have halo B, recently converted to the Magna Clutch system, as well as the Magna Drive Board, with a Powerlyte Cranium Shell. I MAY get the RF sender, but I will wait and see how it performs without it first.

Thanks for any and all recommendations.

jrmiller
03-14-2008, 03:50 PM
if i were you i would stay away from the empire sleeve. they are very hit or miss. lurker makes a awesome product. as for the spring i would get it so just incase you have a fps problem. also the board maynot put out enough power to power the rf chip, but im not to sure on that. hope that helps a bit

Sl@sh
03-14-2008, 08:04 PM
are you having any problems with the gun as it is?

Slimpikins976
03-16-2008, 03:39 PM
Sounds like a good set up but why mess with the ram sleeve? As far as I know upgrades there do nothing, from what I have read. I have a sick Alias and have pretty much the same upgrades as you, with the exception of different Lpr and HPR, and Killa Detents those thing rock !! As far as Rf 'ing your gun I love mine but I know for a fact your board the stock one does not support RF. This means you will have to sodder for one and that can be a pain.
On top of that the voltage might be screwy.
If your planing on doing so think of a board that will support it Tadao has an awsome set up , but you also need to buy the chip for it....
all depends on what you want to drop on the gun, and personal preferences. Engram Ram I have in all my Timmies cant say enough about the things !!! Love them.... hope this helped