TheePsycho
01-06-2011, 12:07 PM
New Baby Trumps Paintball so I'm selling off my gear. Here is a quote from the original for sale thread. I have included his pictures plus mine and have added a CCM leverlock to the feedneck. Either Co2 can be used or a regulator and hpa could be used as well.
Ok, I never thought I'd be selling this marker, but with things in the shape they're in, it appears I cannot avoid it.
It really pains me to sell this marker, so I will not be letting it go cheap.
It is a one-of-one, built by hand, by me, for me. I have the better part of a month's worth of machine work and fitting in this thing, and months on end before that spent on making the design work.
Body and pump are 6061 T-6, built from scratch. Uses 'cocker threaded barrels, AKA threaded feed tubes, and Angel threaded ball detents. Uses second gen Sterling lower tube hardware (hammer, sear, valve, etc), and a second gen Sterling bolt and pump arm. It is set up for a vertical bottle in front of the frame, and has a stainless steel hardline that runs from the VA to the valve body in the rear. It has a second gen Sterling aluminum frame, and comes with the CCM feed neck pictured. There is also a delrin sleeve that goes inside the pump handle to prevent the aluminum pump handle from marring the finish on your barrel, but it will need to be pressed in and cut off flush after everything is anodized. It's very simple to do, so if you buy it raw, another machine shop or airsmith could easily do it, or I can do it for you if you send those parts back.
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/th_IMAG0073.jpg (http://s182.photobucket.com/albums/x11/darkamek/PB/Sterling/?action=view¤t=IMAG0073.jpg)
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/th_IMAG0074.jpg (http://s182.photobucket.com/albums/x11/darkamek/PB/Sterling/?action=view¤t=IMAG0074.jpg)
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingLFQ1.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingDS2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingRRQ.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingRFQ2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingPS2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingPS1.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingLRQ.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingDS3.jpg
Price is $630 + Shipping FIRM
Ok, I never thought I'd be selling this marker, but with things in the shape they're in, it appears I cannot avoid it.
It really pains me to sell this marker, so I will not be letting it go cheap.
It is a one-of-one, built by hand, by me, for me. I have the better part of a month's worth of machine work and fitting in this thing, and months on end before that spent on making the design work.
Body and pump are 6061 T-6, built from scratch. Uses 'cocker threaded barrels, AKA threaded feed tubes, and Angel threaded ball detents. Uses second gen Sterling lower tube hardware (hammer, sear, valve, etc), and a second gen Sterling bolt and pump arm. It is set up for a vertical bottle in front of the frame, and has a stainless steel hardline that runs from the VA to the valve body in the rear. It has a second gen Sterling aluminum frame, and comes with the CCM feed neck pictured. There is also a delrin sleeve that goes inside the pump handle to prevent the aluminum pump handle from marring the finish on your barrel, but it will need to be pressed in and cut off flush after everything is anodized. It's very simple to do, so if you buy it raw, another machine shop or airsmith could easily do it, or I can do it for you if you send those parts back.
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/th_IMAG0073.jpg (http://s182.photobucket.com/albums/x11/darkamek/PB/Sterling/?action=view¤t=IMAG0073.jpg)
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/th_IMAG0074.jpg (http://s182.photobucket.com/albums/x11/darkamek/PB/Sterling/?action=view¤t=IMAG0074.jpg)
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingLFQ1.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingDS2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingRRQ.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingRFQ2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingPS2.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingPS1.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingLRQ.jpg
http://i182.photobucket.com/albums/x11/darkamek/PB/Sterling/RBSterlingDS3.jpg
Price is $630 + Shipping FIRM