Shifter19
02-17-2011, 12:08 AM
Well here is the deal, I've collected too many low end markers, and need to get rid of most. Currently, I shoot my Spimmy as my main marker, and will be keeping one marker as a back up, and then selling the others. I can decide which one I want to keep, so I'll let you decide!
Between my two back ups:
Odyssey RPM
Bought off God4Hire on IOG, sweet little gun!!
Uses FASOR technology (much like a Wrath) and runs at ~225psi!
Was chronoing at 274-282 fps with mid grade paint. Shoots like a dream!
Was originally compared to the Ion, but majority of reviews rank it well above the Ion in performance. This one has been tapped to fit an autococker VA (By God4Hire) to run a regulator.
Now for eye candy:
http://i112.photobucket.com/albums/n192/shifter19/DSCN2070.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2068.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2069.jpg
Comes with:
2k2 Bob Long regulator, recently rebuilt, and set to output of 235psi (Turned up to chrono)
Check-It On/off
Clamping feedneck
Price: TRADED
video: http://www.youtube.com/watch?v=3Qkcc1YIzQ0
If nobody picks up the RPM, maybe they will like my
Azodin EW-1
Now, you're probably saying, hey stupid, that is a Spyder VS1, and you're not wrong. When Azodin bought Spyder's factories in Thailand, they found a massive amount of VS1 bodies and parts lying around. I work for a store that is now the West Coast repair facility for Azodin, and they sent us some "EW-1's" too see what we could do with them. I got one to finally get a Spyder LP project. This is no longer an ordinary Spyder. I milled the front end of the lower tube to fit a higher flowing 32* frontblock. The striker has been replaced with a polished delrin/aluminum striker from Azodin, as to reduce weight. I added a CP regulator and trigger, for a better feel, and to top it all off, I installed a Tadao board for faster performance.
This thing almost outshoots my spimmy, and is easily lighter and more comfortable.
http://i112.photobucket.com/albums/n192/shifter19/DSCN2078.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2076.jpg
Video: http://www.youtube.com/watch?v=zeAXya_-bvg
Upgrades:
Tadao Board
CP Rake Trigger
CP On/off Direct Mount
CP Shorty Regulator
Milled for new Frontblock
32* High Flow Front Block
Lightened Striker from Azodin (30% Lighter than Stock)
Price: $160
Between my two back ups:
Odyssey RPM
Bought off God4Hire on IOG, sweet little gun!!
Uses FASOR technology (much like a Wrath) and runs at ~225psi!
Was chronoing at 274-282 fps with mid grade paint. Shoots like a dream!
Was originally compared to the Ion, but majority of reviews rank it well above the Ion in performance. This one has been tapped to fit an autococker VA (By God4Hire) to run a regulator.
Now for eye candy:
http://i112.photobucket.com/albums/n192/shifter19/DSCN2070.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2068.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2069.jpg
Comes with:
2k2 Bob Long regulator, recently rebuilt, and set to output of 235psi (Turned up to chrono)
Check-It On/off
Clamping feedneck
Price: TRADED
video: http://www.youtube.com/watch?v=3Qkcc1YIzQ0
If nobody picks up the RPM, maybe they will like my
Azodin EW-1
Now, you're probably saying, hey stupid, that is a Spyder VS1, and you're not wrong. When Azodin bought Spyder's factories in Thailand, they found a massive amount of VS1 bodies and parts lying around. I work for a store that is now the West Coast repair facility for Azodin, and they sent us some "EW-1's" too see what we could do with them. I got one to finally get a Spyder LP project. This is no longer an ordinary Spyder. I milled the front end of the lower tube to fit a higher flowing 32* frontblock. The striker has been replaced with a polished delrin/aluminum striker from Azodin, as to reduce weight. I added a CP regulator and trigger, for a better feel, and to top it all off, I installed a Tadao board for faster performance.
This thing almost outshoots my spimmy, and is easily lighter and more comfortable.
http://i112.photobucket.com/albums/n192/shifter19/DSCN2078.jpg
http://i112.photobucket.com/albums/n192/shifter19/DSCN2076.jpg
Video: http://www.youtube.com/watch?v=zeAXya_-bvg
Upgrades:
Tadao Board
CP Rake Trigger
CP On/off Direct Mount
CP Shorty Regulator
Milled for new Frontblock
32* High Flow Front Block
Lightened Striker from Azodin (30% Lighter than Stock)
Price: $160