where do barbs go?

[Serj]

i just bought a 2k2 someone was using as a project and its missing two barbs. could someone just draw in on paint where barbs go? and what kind of hose do i need? im sure when i get it ill have plenty more questions

[jrmiller]

there are 2 on the bottom of the ram tube. and one located one the front block. there are also 3 located on the noid. ill try to find you photo :tup:

[zeoalex]

well, 3 are on the noid, 1 is on the frontblock, 1 is on the very end of the ram sleeve, and the third is toward the front/middle of the ram sleeve. If you look it should be pretty obvious. as to the hoses, when you order barbs, you will probably get hi-flow, which use the hi-flow tubing. I dunno if the barbs you have are stock or not, but if you feel comfortable taking them off, try to stick a .50 allen key through it and if it fits you've got a hi-flow barb that uses hi-flow tubing. You can probably preform this test with the barb still on actually.

[crankwalk]

There is a post in our "Articles" section about this.

http://www.intimidatorowners.com/forums/showthread.php?t=650