Themole
07-13-2011, 12:46 AM
Thinning out the herd, so my Vikings are on the block :(
RULES:
I do not ship first! I have plenty of feedback to prove I am trustworthy
Please post in the thread then PM.
DO NOT ask for the lowest price! I will not answer you.
Prices are fairly firm. Please keep in mind the price includes PP and shipping with tracking and insurance
Not really looking for trades. I will look at offers that are highly in my favor.
Please NO DP/Invert products
First up: Unmilled
Very clean and very smooth marker. Drilled for eyes from the factory; the tray still needs to be milled for the wires so it is currently eyeless (comes with the covers); Running a 1.6 WAS board so it is eye compatible. The marker itself hardly has any marks on it, with most of the wear on the CCM feedneck. It will come with a new 14" CP barrel. Hate to see this one go.
PRICE: $400
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1924.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1923.jpg
Second: Halfmilled
This was the first Viking I bought, mostly to try them out (instantly fell for them). The marker has an AKALMP volumizer and SCM, JMJ trigger, shortened bolt, lighter bolt-pin and a low-rise feedneck. It is being ran by a WAS board (not sure the version, but is eye compatible)
One of the previous owners drilled it for the eyes and didn't do the best job in the world. They had to patch it slightly with JB weld. The markers body is in OK shape, but shows its age. CP reg is also banged up from a previous owner attempting to take it apart.
The person I purchased the marker from said the eyes were working just fine, but I was not able to get them working properly. They were majorly pinched when I received it, so this may be the issue. But I cannot confirm that it was. The eyes that were received were discareded so it does not come with eyes, nor does it come with eye covers, only the detent cover. None the less, it shoots smooth as ever and has yet to chop a ball. It will need to be tuned with the CP reg on it. Also, will not come with an ASA or barrel.
On a side note, I know of a user who has new eye covers for sale. I will point the person in their direction if marker is purchased.
PRICE: $250
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1929.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1928.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1932.jpg
JB Weld in breach
More Pictures (http://s381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/)
I will give a deal if both markers are purchased together.
Let me know if there are any questions, thanks.
Feedback:
Custom Cockers (http://customcockers.com/forum/itrader.php?u=13764)
MCB (http://www.mcarterbrown.com/forums/feedback/148494-themoles-feedback.html)
TechPB (http://www.techpb.com/forum/index.php?showtopic=136741&st=0&p=2056895&#entry2056895)
Intimidator Owners (http://www.intimidatorowners.com/forums/showthread.php?t=7746)
RULES:
I do not ship first! I have plenty of feedback to prove I am trustworthy
Please post in the thread then PM.
DO NOT ask for the lowest price! I will not answer you.
Prices are fairly firm. Please keep in mind the price includes PP and shipping with tracking and insurance
Not really looking for trades. I will look at offers that are highly in my favor.
Please NO DP/Invert products
First up: Unmilled
Very clean and very smooth marker. Drilled for eyes from the factory; the tray still needs to be milled for the wires so it is currently eyeless (comes with the covers); Running a 1.6 WAS board so it is eye compatible. The marker itself hardly has any marks on it, with most of the wear on the CCM feedneck. It will come with a new 14" CP barrel. Hate to see this one go.
PRICE: $400
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1924.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1923.jpg
Second: Halfmilled
This was the first Viking I bought, mostly to try them out (instantly fell for them). The marker has an AKALMP volumizer and SCM, JMJ trigger, shortened bolt, lighter bolt-pin and a low-rise feedneck. It is being ran by a WAS board (not sure the version, but is eye compatible)
One of the previous owners drilled it for the eyes and didn't do the best job in the world. They had to patch it slightly with JB weld. The markers body is in OK shape, but shows its age. CP reg is also banged up from a previous owner attempting to take it apart.
The person I purchased the marker from said the eyes were working just fine, but I was not able to get them working properly. They were majorly pinched when I received it, so this may be the issue. But I cannot confirm that it was. The eyes that were received were discareded so it does not come with eyes, nor does it come with eye covers, only the detent cover. None the less, it shoots smooth as ever and has yet to chop a ball. It will need to be tuned with the CP reg on it. Also, will not come with an ASA or barrel.
On a side note, I know of a user who has new eye covers for sale. I will point the person in their direction if marker is purchased.
PRICE: $250
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1929.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1928.jpg
http://i381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/IMG_1932.jpg
JB Weld in breach
More Pictures (http://s381.photobucket.com/albums/oo258/TheCakeIsALie665/The%20Viking/)
I will give a deal if both markers are purchased together.
Let me know if there are any questions, thanks.
Feedback:
Custom Cockers (http://customcockers.com/forum/itrader.php?u=13764)
MCB (http://www.mcarterbrown.com/forums/feedback/148494-themoles-feedback.html)
TechPB (http://www.techpb.com/forum/index.php?showtopic=136741&st=0&p=2056895&#entry2056895)
Intimidator Owners (http://www.intimidatorowners.com/forums/showthread.php?t=7746)