2k5 W/virtue Need Help

[scruffydawg]

HI, I just put a virtue in my 2k5 and the BPS dose not seem to be very fast. The settings are set to default and the firing mode is NXE. My set up is 2k5 with kila detents, shocktech ram and adjustable cap, factory bolt with slots cut into it, factory regs, with empire "B" w/rip drive. Any ideas or help would be great.
Thanks

[LunchboxMischke]

if its all on stock settings still it is uncapped unless you put the 15bps cap on with the dipswitch check that if your still shooting slow your eye's might be dirty or your hopper is runnin out of batteries or you just have slow fingers

[scruffydawg]

It is uncapped the dip switches are in the right position, the eyes seem to be ok but I ordered some new ones anyway, and put new batteries in the hopper. As for the fingers you only have to hold it down for the full auto and I have never had any complaints.(LOL)

[LunchboxMischke]

whats the dwell set at?

[Turkey]

It could be a couple things,
1. Does the light flash yellow when you first turn it on? That's means u have a low battery. Low batteries mess with the Dwell and ROF on the Virtue Boards, so try changing the battery
2. Check you Max rate of fire (flickering red) it should be on 1.
3. Check the eye sensitivity (teal) it should be set to 5 for the default.

I would replace the battery 1st. I know you said your settings are on default, but I had to retune mine before they worked. ß

[scruffydawg]

I put in a new battery to start with.

ok Checked all settings
Debounce - Green - 5
RAS - BLue - 5
Ramp % - White - 1
Dwell - Red - 10
Eye Delay - Teal - 5
AMB - Yellow - 3
Anti bolt - Flikering green - 1
Max rate of fire - Flikering red - 1

Thanks!!

[Turkey]

Let us know how it turns out! :D