Alias Velocity

[p8ntballben2004]

I just picked up an 05 Alias that hasnt been used in awhile - I cleaned up the bolt and ram, relubed the ram, LPR, and HPR - I shot it and it cycles fine, but the velocity doesnt get much over 180fps @ ~100psi - I messed with the regs but I still couldnt get it to shoot any higher - does anyone know what I need to do?

Thanks!

[pbfrenzy44]

the lpr should be around 70 psi and the reg should be at about 250 psi to start and then u can fine tune it from there.

[p8ntballben2004]

ok - well that doesnt really help me - I dont have a gauge on the HPR, is there a way to tell?

[pbfrenzy44]

what i did was got an asa and put a gauge into it and then screw the reg into that and then have a separate asa that u screw the tank into

[crankwalk]

Here are some instructions on how to set the regs

http://www.intimidatorowners.com/forums/showthread.php?t=19

The setting of 85psi in that post was made with a 2k2 marker in mind. The Alias manual recommends a pressure of between 70-80psi (stock).