PDA

View Full Version : impressed...but need help

FattyMcBOOMBOOM
05-13-2008, 11:40 PM
:cheers:I own a Ripper 2 and I love it, but sadly (dont hate me) I purchased a Ego and have used it and my Ripper has been collecting dust in my gear bag

long story short

my ego broke and I used my Timmy and for not being lubed or anything for about a year it worked great, but after a while it leaked, chopped, a whole mess

I took it home, put a little loving on it and the leaks are all fixed and its cleaned and ready to go but I want to tune the settings and adjust the ram and bolt

any ideas

oh I use psp ramp (cap 15) for practice so any good settings for my Frenzy board?
Stewey956
05-13-2008, 11:41 PM
Just go over settings, and retune regs is all I have to say.
crankwalk
05-14-2008, 11:29 AM
Using the stock Frenzy board these are some popular settings (aka "Rendition" settings):

BIP 2ms
Dwell 9ms
Bolt Forward/Bolt Delay 15ms
LPR at 80psi
Mbounce at 1
Debounce at 4
eyes set to "force" mode
jrmiller
05-14-2008, 01:59 PM
Using the stock Frenzy board these are some popular settings (aka "Rendition" settings):

BIP 2ms
Dwell 9ms
Bolt Forward/Bolt Delay 15ms
LPR at 80psi
Mbounce at 1
Debounce at 4
eyes set to "force" mode

that seems to be the best settings that are out there. :tup:
FattyMcBOOMBOOM
05-14-2008, 10:58 PM
:tup:yup, wrote down the settings and set my Timmy up with them, shots very nice

Thanks guys
crankwalk
05-16-2008, 12:11 PM
hey glad to hear it!