LCD says Bob Long 113

[auz11]

On start up the board says 113. I believe it's a frenzy, but not positive. Can anyone clarify and lead me to a manual for it?

[auz11]

Never mind, I won't be able to do anything to it anyway, my membrane doesn't work. Brand new membrane from paintball kingdom. Anyone else had an issue like this and a solution?

[lopez17]

The board is a Frenzy 113 (semi only) board for 2K2 style Intimidators. The menu options are the same for it as for the Frenzy 116 boards.

[crankwalk]

On the membrane issue, try flipping the wiring connector coming from your 12pt harness around.. Sometimes its just plugged in backwards.

[auz11]

flipped and flipped numerous times to no prevail... maybe it is not the right membrane for the board. Maybe I'm suppose to have the on/off +2 buttons membrane?

[crankwalk]

The harness you speak of is the Alias style harness and would not connect at all to your wiring/board.

I know there was a way to "short" various combinations of the three pins on the membrane pad connector from the 12 pt harness in order to simulate button pushing and get the board into programming mode, etc (this was to be done in case of emergency) but you could try this method to see if you can get the board to do different things - meaning the membrane pad is indeed bad if you can get the board into a different mode. The other thing could be maybe your existing wiring is bad

Try using something conductive to touch 2 pins at a time, I think there was a post somewhere about how to do it but I can't find it. Lopez, any ideas?

[lopez17]

Take an allen wrench (not on a tool) and push it across the three pins and this will act as if you're depressing both buttons. To activate the right or left button you'll need to short the middle pin AND either the right or left button depending on what you try to do. I usually put the allen wrench in between the two prongs and touch them quickly. If you leave it on there it'll cycle through the menu options or jack up the settings quite quickly. You'll have to be patient but it's a neat trick if your membrane isn't functional.

[crankwalk]

^^^ awesome! Thanks for that info lopez

[IRStookmySpyder]

lopez17- That is great to know, my last Timmy didn't have a functionally membrane pad so this would have helped there.

[crankwalk]

Info has been turned into an Article

http://www.intimidatorowners.com/forums/showthread.php?t=950

Lopez feel free to edit it if you'd like or want to add some more info

[IRStookmySpyder]

crankwalk- Great idea because I would probably forget what thread the information was in.