Intimidator Owners Group  

Go Back   Intimidator Owners Group > The Intimidator > Articles

Assembly of a Gen3 Intimidator - Video

Articles

Reply
 
Thread Tools
Old 03-22-2008, 03:21 AM   #1
android17ak47
IOG Member
 
android17ak47's Avatar
 
Join Date: Mar 2008
Location: southwest florida
Posts: 68
Assembly of a Gen3 Intimidator - Video

I just got my ripper II back in the mail, and it needed a overhaul of the orings so I took it apart, and decided to get the assembly on vid for all of those who have been asking for an assembly vid.

This vid will cover everything on how to properly assemble a gen3 intimidator from scratch.

Do note that in vid#1, the installation of the ram sleeve is recomended to be inserted from the front of the body, rather than the back like I demonstrated, but as I said in the vid I have had best luck doing it that way, and obviously it went well.

I hope this vid helps anyone who may be looking to put together a gen3 timmy, that may need to know what parts to get, and how they all go together.

Part 1
Part 2
Part 3
Part 4
Part 5
Part 6


Part 7
And this final vid is the testing stage to see whether or not it was a successful assembly. You will see if there was any leaks after all orings were replaced and lubed properly, and then a crono vid to top things off. Basically this shows how well a timmy will shoot when it has been maintained properly, and the results were astounding. And keep in mind I was using a cp reg, so all will know that yes, even a cp reg can perform with the best of them if maintained properly, which is what it is all about.
android17ak47 is offline   Reply With Quote
Old 03-22-2008, 12:02 PM   #2
Megatron
Moderator
 
Megatron's Avatar
 
Join Date: Oct 2007
Location: SoLou
Posts: 1,697
well done bud!!!
Megatron is offline   Reply With Quote
Old 03-22-2008, 02:49 PM   #3
android17ak47
IOG Member
 
android17ak47's Avatar
 
Join Date: Mar 2008
Location: southwest florida
Posts: 68
Quote:
Originally Posted by Megatron View Post
well done bud!!!
Thanks.
android17ak47 is offline   Reply With Quote
Old 03-22-2008, 06:29 PM   #4
Squirlly
IOG Senior Member
 
Squirlly's Avatar
 
Join Date: Dec 2007
Location: Pataskala, Oh
Posts: 668
<sniff> <sniff> I smell a sticky

-Tim
__________________
If you're not havin' fun... You're not doin' it right!!!
I can still do everything I could when I was 18, it just takes twice a long and/or hurts twice as much.
Paintballs are cheaper than phycotherapy!!
Ohio Chapter Christian Paintball Players Association Treasurer
www.christianpaintball.com . . . . . . . . . . www.ohiocppa.org
Squirlly is offline   Reply With Quote
Old 03-22-2008, 09:08 PM   #5
android17ak47
IOG Member
 
android17ak47's Avatar
 
Join Date: Mar 2008
Location: southwest florida
Posts: 68
Quote:
Originally Posted by Squirlly View Post
<sniff> <sniff> I smell a sticky

-Tim
I was actually asked by crankwalk to post this as it is already in the stickies in the intimidator forum on pbnation. So it will prob get stickied as soon as he sees it.
android17ak47 is offline   Reply With Quote
Old 03-23-2008, 06:57 PM   #6
Alias2007
IOG Senior Member
 
Alias2007's Avatar
 
Join Date: Aug 2007
Location: Alabama
Posts: 204
Excellent job
Alias2007 is offline   Reply With Quote
Old 03-24-2008, 12:44 PM   #7
crankwalk
IOG Owner
 
crankwalk's Avatar
 
Join Date: Aug 2007
Location: DC Metro
Posts: 3,014
Awesome thanks! Thread has been stuck
__________________

My Feedback: IOG | PBN old - PBN new | PBR
crankwalk is offline   Reply With Quote
Old 04-10-2008, 12:02 PM   #8
rauleetoe
IOG Senior Member
 
Join Date: Oct 2007
Location: Tampa, Florida
Posts: 681
would this help me with installing a new body onto a 2k2 timmy?
looks similar enough..nice video by the way,very helpfull
rauleetoe is offline   Reply With Quote
Old 04-11-2008, 10:59 PM   #9
crankwalk
IOG Owner
 
crankwalk's Avatar
 
Join Date: Aug 2007
Location: DC Metro
Posts: 3,014
yes it should help you with that as well, as 2k2s and Aliases are similar in assembly. This is a great reference video and you should be fine with using it, but if you find yourself stuck feel free to post a question in the Tech Help forum
__________________

My Feedback: IOG | PBN old - PBN new | PBR
crankwalk is offline   Reply With Quote
Old 12-01-2010, 12:01 PM   #10
Vegard
IOG Senior Member
 
Join Date: Jun 2008
Location: Norway
Posts: 121
Are these re-uploaded somewhere? The pbn hosting seems to have gone MIA.
__________________
Vegard is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Shoutbox provided by vBShout (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
Copyright 2017 intimidatorowners.com, All Rights Reserved